1.
Spalling was a major form of contact fatigue failures in nitriding steel.
氮化钢的主要接触疲劳破坏形式是剥落。
2.
Research on the Nitriding Technics of 38CrMoAIA Steel;
38CrMoAlA钢氮化工艺研究
3.
Study on Nitriding Process for 1Cr9MoVNbN Steel
1Cr9MoVNbN钢氮化工艺的研究
4.
Investigation of Carbonitride in Nitrogen-combining 18Mn-4Cr-0.4C Non-magnetic Steel;
含氮18Mn-4Cr-0.4C无磁钢的碳氮化合物研究
5.
Study on the nitrogen alloying process of nitrogen-contained 316 L stainless steel
含氮316L不锈钢氮合金化工艺研究
6.
Comparison Experiment on Inclusion in Nitride Chromium and Nitride Manganese for High Nitrogen Steel
高锰钢氮化铬和氮化锰中夹杂物的对比实验
7.
Study on Variety Regulation of Nitrogen Content in Gear Steel Produced by Compact Process
短流程生产齿轮钢钢中氮含量的变化规律研究
8.
Study of Twinning Induced Plasticity with Addition of Nitrogen or Niobium;
氮、铌合金化孪生诱发塑性（TWIP）钢的研究
9.
Research on Enhancement of Denitrogenizaion and Deoxidation from Melt Steel in Physical Field;
外场作用下强化钢液脱氮、脱氧的研究
10.
The Example Analysis on Variation of Oxygen and Nitrogen Content in Steelmaking Process
炼钢工艺流程氧氮含量变化实例分析
11.
Development of V-N Microalloyed Resistance Weather Corrosion Steel Strip
钒氮微合金化耐大气腐蚀钢板的研制
12.
Passivating Treatment of Multiple Nitriding Layer for 15-5PH Stainless Steel
15-5PH不锈钢多元渗氮层的钝化处理
13.
Ion-nitridizing Process of 5CrMnMo Die Steel
5CrMnMo模具钢的离子氮化工艺
14.
Study on Salt Bath Nitrocarburizing of 17-4PH Stainless Steel
17-4PH不锈钢盐浴复合氮化处理研究
15.
Chemical Phase Analysis for Nitrogen in Low Alloy Steel Samples of Small Sizes
小尺寸低合金钢样中氮的化学相分析
16.
Effect of Surface Treatment on the Fretting Wear Behavior of Medical Grade Austenitic Stainless Steels
碳化、氮化与碳氮化对316LVM不锈钢微动腐蚀磨损性能的影响
17.
Influence of Nano-crystallization by Surface Strengthens Pressure Shot Penning on Gas Soft-nitriding of 35 Steel
35钢表面增压喷丸纳米化对气体软氮化的影响
18.
STUDY ON SHORTENED BIOLOGICAL/DENITRIFICATION OF COKE OVEN WASTE WATER IN IRON AND STEEL COMPANIES
钢铁企业的焦化废水短程生物脱氮的研究