1.
The lead extrusion dampers( LED) were designed by the plastic yielding ability of the lead.
利用铅的塑性变形能力,设计制作了铅挤压阻尼器.
2.
Deforming resistance is capability of material resisting deform.
变形抗力是材料本身抵抗塑性变形的能力。
3.
distortion energy plasticity condition
形状变形能塑性条件
4.
element of mechanics of plasticity
塑性变形的力学原理
5.
extrusion stress
(塑性变形的)挤压应力
6.
The Plastic Deformation and Microstructure and Mechanical Properties of Mg-5Zn-3Nd-xZr Magnesium Alloy
Mg-5Zn-3Nd-xZr镁合金的塑性变形及组织与力学性能
7.
Plastic Deformation,Microstructure and Mechanical Properties of Mg-Zn-Nd Magnesium Alloy
Mg-Zn-Nd镁合金的塑性变形及组织与力学性能
8.
Microstructure and Mechanical Properties of Fe24Mn0.5C TWIP Steel
Fe24Mn0.5C形变孪晶诱发塑性钢的显微组织和力学性能
9.
The capacity of a material, such as plastic or metal, to return to a previous shape after deformation.
弹性，恢复能力物质变形后恢复原来形状的能力，如塑料或金属
10.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
11.
A method to improve seal property by plastic deformation;
一种用塑性变形改善密封性能的方法
12.
Research on Deformation Mechanism and Relationship Between Microstructure and Properties of Quenching and Partitioning Steel
Q&P钢塑性变形机制及组织-性能研究
13.
The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle
圆杆端部在倾斜压模间的塑性变形力
14.
the plastic forces that create and wear down a mountain range.
能形成和腐蚀山脉的塑性力
15.
Study on Flow Stress Behavior of TA15 Titanium Alloy during High Temperature Plastic Deformation
TA15钛合金高温塑性变形流变应力行为研究
16.
Flow Stress of 7050 High Strength Aluminum Alloy during High Temperature Plastic Deformation
7050高强铝合金高温塑性变形的流变应力研究
17.
Stresses applied to plastically deform the metal are usually compressive.
适用于金属塑性变形的应力通常都是压应力。
18.
Elastic-plastic deformation effect on distribution of stress and axial force in a threaded bolt
弹塑性变形对螺栓应力和轴力分布的影响