1.
Finite element analysis of pick and holder on hard rock roadheader
硬岩掘进机截齿与齿座的有限元分析
2.
Pick Cutting in the Cutting Head of Roadheaderd and Welding Technoly
掘进机截齿座的开焊原因及改进工艺
3.
primary planet ring
一级行星齿轮轴座圈
4.
The up-down gear turns in the proper direction to raise the seat.
升降齿轮转到适当的方位,升高座椅
5.
Research and Practice On Large-scale Rolling Workshop Pinion Housing Rebuilding;
大型轧钢车间开坯机齿轮座改造研究与实践
6.
Analysis of the Precision Measure Method for the Bearing Seat Hole Center Distance in the Gear Box
齿轮箱轴承座孔的中心距测量方法精度分析
7.
The CNC Hypoid Cutting Machine is a new kind of machine tool, which coordinates all machine movement necessary for gear manufacturing in6 axis of emotion.
螺旋锥齿轮和准双面齿轮数控铣齿机是一种新机床,将齿轮加工所需全部运用用六座标数控来实现。
8.
Bush never wanted a new plane. Ronald Reagan never asked for one either.
布什从来没有想到需要一架新座机，罗纳德-里根也不曾为此而启齿。
9.
dental fitting for making metal crowns or dentures (e.g., sockets, rings, hooks)
牙科用装置,用于制作金属齿冠或假牙（例如凹形托座、环或钩）
10.
Assure both mounting base of gear operator (3) and valve top flange (6) are clean and dry.
确保齿轮操作机构(3)和阀门顶部法兰(6)的安装基座清洁并且干燥。
11.
Aseismatic Analysis and Parameter Optimization of Pedestal about Nuclear Engineering Gear Pumps Unit;
核电工程用齿轮泵机组底座的抗震分析及参数优化
12.
Fault Diagnosis for the R4 Main Transmission System sMain Angular gear seat of the Hot Strip Mill;
R4轧机主传动系统齿轮座及其基础振动的故障诊断
13.
Study on decaying of shock vibration energy during transmission through multi-interfaces in gear-shaft-bearing-housing system
冲击振动能量通过“齿轮-轴-轴承-轴承座”多界面传递损耗研究
14.
Dynamics calculation of gearbox mounting based on FE-SEA hybrid method inbroadband frequency domain
基于混和法的齿轮箱基座动力学特性全频域计算
15.
straight-cut gear
直齿圆柱齿轮，正齿齿轮
16.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
17.
",When the up-down switch is pushed up to raise the seat, the motor starts to turn and, at the same time, the up-down solenoid is actuated to throw the up-down gears into mesh.. "
座椅升高时,推动升降开关,马达开始转动,同时升降电磁线圈起动并推动升降齿轮啮合
18.
To put a crown on(a tooth).
镶齿冠为（牙齿）镶齿冠