1.
Dynamic Simulation of Uneven Contact and Friction Process of Drum Brake and Its Effect on NVH
鼓式制动器接触与摩擦不均匀及其影响的动态过程仿真
2.
metal to-metal contact
干摩擦金属与金属直接接触
3.
touch or rub constantly.
经常地接触或发生摩擦。
4.
For sliding contact, the coefficient of kinetic friction Uk is defined as the ratio of the frictional force to the normal force.
滑动接触时，动摩擦系数Uk的定义是摩擦力与法向力的比率。
5.
The friction is modeled with a modified coulomb friction model.
模具与板料的接触摩擦采用一个修正的库仑摩擦模型。
6.
On the Relation of Dry Friction of Solids and the Rest Contact Time and Slip Speed
固体干摩擦与接触时间、滑动速率的关系探讨
7.
"Friction is a result of attractive forces Between the contact regions of two Bodies, and the amount of friction is almost independent of the area of contact. "
金属间之摩擦力主要来自接触面间之附着力,亦即所谓之黏合力。摩擦力与接触面积大小无关。
8.
The interaction of sliding surfaces is modeled with a Coulomb friction law.
接触面间的摩擦约束采用库仑摩擦模型。
9.
A Mixed Element of Displacement and Force of Coulomb Friction Contact
库仑摩擦接触问题的位移─力混合接触单元
10.
Sliding friction is independent of the area of surface in contact.
滑动摩擦力于表面接触的面积无关。
11.
Study on Contact and Friction in Numerical Simulation of Sheet Metal Forming;
板料成形数值模拟中的接触摩擦研究
12.
Research on the Theory Methods for the Fast Algorithm in the Boundary Element Method for the Elasticity and Elasto-Plas Ticity Contact with Friction
弹性及弹塑性摩擦接触边界元快速算法的理论与方法研究
13.
Research on the Relationship between Average Friction Coefficient and Contact Press in Metal Plastic Forming
金属塑性成形平均摩擦系数与接触压力的关系研究
14.
Research on the Relationship between Average Friction Coefficient and Contact Press on Metal Plastic Forming;
金属塑性成形的“平均摩擦系数”与接触压力的关系研究
15.
Theory and Research of Frictional Contact Element on Concrete Diaphragm Wall in Earth-Rock Dam;
土石坝防渗墙体与坝体间摩擦接触单元理论研究
16.
Comparative Study on Friction and Wear Behaviors of Carbon and Copper-impregnated Metalized Carbon Rubbing against Contact Wire with Electrical Current
纯碳、浸金属碳与接触线载流摩擦磨损性能对比研究
17.
Treatment method of the high strength bolt friction type connection interface
高强度螺栓摩擦型连接接触面的处理方法
18.
To" lubricate" means to reduce the frictions of contacting surfaces in machinery components.
润滑是为了减少机器零件接触表面的摩擦。