1.
Green State Joining of ZrO_2-CePO_4 Ceramics;
ZrO_2-CePO_4系陶瓷坯体连接
2.
Join Al_2O_3/ZrO_2 Ceramics in Green State by Al Oxidation Method;
铝氧化法坯体连接Al_2O_3-ZrO_2陶瓷
3.
Study on the Graded Joining of Al_2O_3 and ZrO_2 in Green Bodies;
氧化铝和氧化锆坯体梯度连接的研究
4.
Continuous box-typed dryer modules compose of the dryer.
该干燥窑由箱体式组成，组成一贯连接不断地提供合格干燥坯体的箱体。
5.
PIV Analysis on Flow in the Mold during Continuous Casting of Steel Slab;
板坯连铸结晶器内熔体流动的PIV分析
6.
ON TECHNICAL AND ECONOMICAL BENEFIT OF HOT CONVEYANCE AND HOT CHARGE AND DIRECT ROLLING OF CONTINUOUS CAST BLANK
连铸坯热送热装和直接轧制的技术经济效益
7.
Research on Soft-contact Electromagnetic Continuous Casting Technology of Ultra High Strength Aluminium Alloy Slabs
超高强铝合金板坯软接触电磁连铸工艺研究
8.
Study of Meniscus Shape in Mold of Medium-Frequency Soft- Contact Electromagnetic Continuous Casting for Round Billets
圆坯中频电磁软接触连铸结晶器内弯月面研究
9.
EVOLVEMENT MECHANISM OF SURFACE OSCILLATION MARKS ON ROUND BILLET DURING SOFT-CONTACT ELECTROMAGNETIC CONTINUOUS CASTING
电磁软接触连铸圆坯表面振痕演变机理
10.
The Reconstructed and Promoted Adaptability of SCR1600 Continuous Casting and Rolling for Producing Copper Alloy Contact Wire
SCR1600连铸连轧制备接触线用铜合金线坯的适应性改造
11.
Overall technical design of No.4 bloom CCM at LISC
莱钢炼钢厂大方坯连铸机总体工艺设计
12.
A Study on Liquid Steel Mixing and Flow State in Tundish for C C Multl-Strand Billets
多流水方坯连铸中间罐内液体流动状态的研究
13.
Physical Modeling on Fluid Flowing Control in A 6-straud Billet Continuous Casting Tundish
六流方坯连铸中间包流体流动控制物理模拟
14.
Influence of Argon Gas injection on Fluid Flow in Slab Continuous Casting Mold
吹氩对板坯连铸结晶器流体流动的影响
15.
Board of initial stage of design is bad caster overall technical measures
板坯连铸机设计初期阶段的总体技术措施
16.
Dynamic Control Model of Secondary Cooling Based on the Finite Volume Method
基于有限体积法的板坯连铸二冷动态模型
17.
Microstructures and solidification mode of continuous casting slabs of austenitic stainless steel Cr17Mn6Ni4Cu2N
Cr17Mn6Ni4Cu2N奥氏体不锈钢连铸坯组织及凝固模式
18.
Roll-forging Process and Die Design of Connecting Rod of a Diesel Engine
柴油机连杆体毛坯的辊锻工艺及模具设计