1.
Primary Exploration of Fractal Dimension of Fracture Surface of Deposited Metal and Its Mechanical Properties;
熔敷金属断裂表面分维与其力学性能关系初探
2.
Molecular Dynamics Simulation and In-Situ TEM Analysis of FCC Metal Fracture;
FCC金属断裂的分子动力学模拟及TEM原位分析
3.
He welded the broken rod.
他把断裂的金属棒焊接起来。
4.
Characterization and Measurement of Metals Dynamic Fracture Toughness;
金属材料动态断裂韧性的表征与测试
5.
In Situ Investigation on Plastic Deformation and Cracking of Metals under TEM/SEM;
金属塑性变形与断裂的TEM/SEM原位研究
6.
Fracture Toughness of Al_2O_3-ZrO_2/W/Cr/Ni/Co Cermets
Al_2O_3-ZrO_2/W/Cr/Ni/Co金属陶瓷的断裂韧性
7.
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
8.
The Studies on the Dynamic Fracture and Fragmentation of Metal Freely Expanding Ring Driven by Electromagnetically Loading;
电磁加载下金属膨胀环的动态断裂与碎裂研究
9.
The Experimental Research on Several Points in Unified Fracture Theory of Ductile Material;
金属材料裂纹体与无裂纹体统一断裂理论若干问题的试验研究
10.
The change of breaking strength and elongation of the fabrics before and after metallization was evaluated by strip method according to GB/T 3923.1-1997.
采用条样法测定织物镀金属前后的断裂强力和断裂延伸率。
11.
Sintered metal friction materials-Determination of transverse rupture strength
GB/T10422-1989烧结金属摩擦材料横向断裂强度的测定
12.
Standard test method for plane-strain fracture toughness of metallic materials
GB/T4161-1984金属材料平面应变断裂韧度Kic试验方法
13.
" Metallic materials-Standard test method for JIC, a measure of ductile fracture toughness"
GB/T2038-1991金属材料延性断裂韧度JIC试验方法
14.
(of metal or glass) not annealed and consequently easily cracked or fractured.
（关于金属或玻璃）未退火因而容易破碎或断裂的。
15.
This wire will take 50 pounds tension before breaking.
这根金属线在断裂之前能承受五十磅的张力。
16.
The Effect of the Electrolyses Plating Quality on the Stress Corrosion Fracture of Kovar Alloy
金属应力腐蚀断裂与其保护层质量的关系
17.
The Effect of Stress State on Damage Evolution and Fracture of Metallic Materials;
应力状态对金属材料损伤演化和断裂的影响
18.
Study on Fatigue Damage and Fracture Behavior of γ-TiAl Based Alloys;
TiAl基金属间化合物疲劳损伤与断裂机理的研究