1.
Online ENDT for hardness of iron and steel parts based on online LS-SVM
基于Online LS-SVM的钢铁件淬火硬度在线检测
2.
Determination of effective depth of hardening after induction or flame hardening of steel
GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
3.
Can we control the hardness of the steel when it is harden?
我们能够在钢淬火时控制它的硬度吗?
4.
Influence of overlapping amount on hardness of 9Cr2 steel by laser hardening
搭接量对激光淬火9Cr2钢硬度的影响
5.
Effect of Quenching Treatment on Microstructure and Hardness of (Ti,V)C Steel Bonded Carbide
淬火对(Ti,V)C钢结硬质合金组织及硬度的影响
6.
Effect of Tempering Process on Hardness of 27SiMn Steel in Zero Time Holding Quenching
零保温淬火条件下回火对27SiMn钢硬度的影响
7.
Effect of Quenching Process Parameters on Microstructure and Hardness of 65Mn Steel
淬火工艺参数对65Mn钢组织及硬度的影响
8.
Hardening means making harder .
淬火就是促使变硬。
9.
Finite Element Simulation of the Transient Temperature Field During Laser Surface Quenching and Forecasted Depth of the Hardness Layer;
激光表面淬火瞬态温度场的有限元模拟及硬化层深预测
10.
Effect of Pretreatment on Microstructure and Microhardness of 30CrMnSi Treatment Layer by Laser Quenching
预处理对30CrMnSi激光淬火处理层微观组织和硬度的影响
11.
Computer prediction and experiment validation of microstructure and hardness distribution of parts after induction hardening
感应淬火零件组织和硬度分布的计算机预报及试验验证
12.
Performance Study of Rehardened MC3 Deep Hardening Layer Cold Work Roll;
MC3深淬硬层二次淬火冷轧工作辊使用性能研究
13.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究
14.
So we found that hardening operation is make up of heating and quench.
因此我们发现淬火工序包括加热和淬硬两个步骤。
15.
An Experimental Research on the Surface Roughness by Dry Cutting of Hardened Steel SKD11
硬态干式车削淬硬钢SKD11表面粗糙度试验研究
16.
Properties of 45 carbon steel hardened by micro-plasma
微弧等离子45钢表面淬火硬化层性能分析
17.
Modulating Temperature Field of Laser Hardening and Laser Parameters Optimization;
激光淬火温度场模拟及加工参数优化
18.
The ABAQUS simulation of temperature filed in quenching process of 45 steel part
45钢零件淬火过程中温度场的ABAQUS模拟