1.
Research on Gas-solid Two-phase Flow in Pneumatic Conveying System;
气力输送系统中出料阀内气固两相流动的研究
2.
discharging valve
排出阀排气阀排水阀
3.
This valve is used with the rotary valve to control the material discharged from the bottom of storehouse.
流量控制阀用作控制库底卸出的物料量，通常与气动开关阀一起使用。
4.
MATERIAL AND SERVICE– Cast steel bolted bonnet valves are available in a variety of body/ bonnet materials and trims.
材料和应用–铸钢螺栓阀盖阀门可配置多种阀体/盖材料和阀内件。
5.
Instead, the motor rotate reversely, push rod (piston rod) push out, the valve plate closes, stops discharging.
反之，电机反转，推杆（活塞杆）推出，阀板关闭，停止卸料。
6.
3 The valve body and disc of valve shall be made of ductile cast iron.
阀门的阀体、阀板制造材料应该是球墨铸铁。
7.
The check valve seats shall be of molded thermoplastic construction.
止回阀阀座应该是模制热塑塑料结构。
8.
Pacific cast steel bolted bonnet valves are supplied in a wide range of body/ bonnet materials and trims.
美国太平洋铸钢螺栓阀盖阀门可以配置多种阀体/盖材料和阀内件。
9.
manually operated thermoplastic ball valve
热塑性塑料手动式球阀
10.
"Most common uses in valves are: stem, body and ball materials."
这种材料在阀门上主要用做:阀杆,阀体和球体材料。
11.
Now bring the check assembly through the check retaining wall.
现在将止回阀通过止回阀护壁取出。
12.
water pump outlet valve flange gasket
水泵出口阀法兰垫片
13.
accelerator pump outlet valve ball
加速器泵出油阀钢球
14.
Stem bearing to assure concentric stem rotation, allowing stem packing to provide maximum sealing effectiveness.
阀杆轴承保证同轴阀杆的旋转，使得阀杆填料具有最大的密封效果。
15.
Check valve guiding shall be plastic to plastic.
止回阀引导装置应该是塑料对塑料。
16.
To replace the seat module, pull the seat module out of the body by gripping at the reinforcement ring.
为了更换阀座模块，抓住加强环，将阀座模块拉出阀体。
17.
Packing materials for Wedgeplug valves are covered in Materials of Construction.
楔形塞阀门的填料材料包括在结构材料范围内。
18.
Temperature limitations of body/ bonnet materials, trim, bolting, packing and gaskets must all be considered.
阀体/盖材料，阀内件，填料和垫圈的温度范围都必须考虑。