1.
The Research of Wave Load on the Large Cylindrical Structures;
波浪对大直径圆筒结构的作用力研究
2.
An Analysis on Seismic Response of the Sunk Large Diameter Cylindrical Structure
沉入式大直径圆筒结构地震响应分析
3.
Method of stability analysis of embedded large-diameter cylinder quay
沉入式大直径圆筒码头稳定性计算方法研究
4.
Dynamic Response of Large Diameter Cylinder Breakwater Structure under the Wave Impact;
大直径圆筒防波堤在冲击荷载下的动力响应
5.
Study on Dynamic Analysis and Site Measurement for Large Diameter Cylinder Driving by Vibration;
大直径圆筒振动下沉动力分析及现场试验研究
6.
Study on dynamic plastic displacement to large-diameter cylindrical structure
沉入式大直径圆筒结构的动力塑性变位研究
7.
Processing technique of prototype observation data for large-diameter cylinder wharf
大直径圆筒结构码头原型观测数据处理技术
8.
Numerical analysis on overturn center of embedded large diameter cylinder structure
沉入式大直径圆筒结构倾覆转动点数值分析
9.
Experimental Study and FEM Analysis on the Bearing Mechanism and Internal Force of Embedded Large-diameter Cylinder Structure;
沉入式大直径圆筒结构受荷模式和内力的试验研究与有限元分析
10.
Numerical simulation of wave force on large-diameter cylinders based on Boussinesq equations
基于Boussinesq方程对大直径圆筒结构上波浪力的数值模拟
11.
Research on the Three-dimensional Computing Method of Earth Pressure for Large-diameter Cylinder;
大直径薄壳圆筒结构筒后土压力的空间计算方法
12.
Study on the Bearing Mechanism and Optimization Design of the Embedded Large-diameter Cylinder Structure;
插入式大直径薄壁圆筒结构承载机理研究与优化设计
13.
Research on the Bearing Mechanism and Spring Element Numerical Simulation of the Bed Seated Large-diameter Cylinder Structure;
基床式大直径薄壁圆筒结构受力机理与弹簧元数值模拟
14.
Dynamic Analysis Model of Bed Seated Large Diameter Cylinder Breakwaters under Random Wave;
随机波浪作用下座床式大直径薄壁圆筒防波堤动力分析模型
15.
Transient-dynamic-FEM Analysis of the Course of Vibration-driving the Thin-wall Large-diameter Cylinder Structure;
大直径薄壁圆筒结构振动下沉过程瞬态动力有限元分析
16.
Research on the Stability of a Large-diameter Ground-supported Flat-bottomed Cylindrical Steel Silo Load of Alumina Powder
大直径落地式平底氧化铝圆柱钢筒仓稳定性能研究
17.
Analysis on Riprap Work in a Large-diameter Cylinder with Reinforced Concrete Thin-wall
关于大直径钢筋混凝土薄壁圆筒内抛石施工的分析
18.
Single cylinder knitting machines, up to 165mm diameter
直径165毫米以下的单针筒圆型针织机