1.
"attach each leg to the bottom of the enclosure using the three nuts, bolts, and washers provided for each leg."
将每个支柱联结到外壳底部,对于每个支柱,采用三套螺母、螺栓和垫圈与外壳进行连接。
2.
burst hose jacket
水带护套翼状螺母组成
3.
a wrench with a hook that fits over a nut or bolt head.
有一个钩子套在螺母或螺栓头的扳手。
4.
Hold puller screw and tighten puller nut until bushing is remove
握紧拉拔器螺栓，拧紧拉拔器螺母，直至拆下衬套。
5.
a wrench with a closed loop (a socket) that fits over a nut or bolt head.
有闭环（插槽）可以套在螺母或螺栓头上的扳手。
6.
" Connections with waisted stud--Nuts, extension sleeves"
GB/T13807.3-1992腰状杆螺柱连接副螺母、受力套管
7.
Bite type tube fittings--Nuts
GB/T3759-1983卡套式管接头用螺母
8.
Bite type tube fittings--Hexagon thin nuts
GB/T3763-1983卡套式管接头用六角薄螺母
9.
Bite type tube fittings--Nuts for butt joints
GB/T3760-1983卡套式管接头用对接螺母
10.
Sleeve 1;Sleeve 2;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;螺纹套筒 1;螺纹套筒 2
11.
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。
12.
tap and die set
全套螺丝攻和螺丝板牙
13.
brass bolts and nuts with round head
黄铜圆头螺栓和螺母
14.
threaded type track bolt nut chuck
螺纹式轨道螺母夹头
15.
follower stud and unt
从动板柱螺栓及螺母
16.
Design of Self-Centering Expansion Clamp of the Gland Nut in the Lead-in Device of Rubber Pipe Cable for Mine Explosion-Proof Electric Equipment
矿用防爆电器设备用橡套电缆引入装置中压紧螺母自定心膨夹具的设计
17.
inserted nut abrasive discs and inseted nut ring wheels
带螺母砂盘和带螺母环形砂轮
18.
Install adjuster nut and lock nut.
安装调节器螺母和防松螺母。