1.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Circumferential Part-Throughwall Cracks;
含内表面环向裂纹光滑管弹塑性有限元分析
2.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析
3.
Study on Calculation of Influence Function with Fracture Mechanics Analysis Method for Circumferential Through-Crack Pipe
含环向贯穿裂纹管道断裂力学工程方法影响函数的计算研究
4.
Propagation and Environmental Propagation of the Indentation Crack of Ferroelectric Materials;
铁电材料压痕裂纹的开裂与环境开裂
5.
FE-Meshfree Coupled Method for Calculating Stress Intensity Factor of Circumferential Through-Wall Crack on Pipes
直管环向贯穿裂纹应力强度因子的有限元无网格耦合计算方法
6.
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
7.
FRACTURE TOUGHNESS MEASUREMENT OF CAST MAGNESIUM ALLOY BY CYLINDRICAL SPECIMEN WITH RING-SHAPED CRACK
用环状裂纹圆柱试样测定铸镁合金的断裂韧度
8.
Cause Analysis of Cracks on SH150 Elevator Link
SH150型双臂吊环裂纹成因分析
9.
High environment humidity increases the susceptibility to hy-drogen induced cracking and stress corrosion cracking.
高湿度能增大氢致裂纹和应力腐蚀开裂倾向。
10.
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
11.
A STUDY ON FATIGUE CRACK INITIATION AND SMALL CRACK GROWTH UNDER THE CYC LIC COMPRESSIVE LOAD CONDITION
压缩循环加载下缺口裂纹的萌生与小裂纹扩展规律研究
12.
Cracks grow in directions nearly parrallel to the surface.
裂纹在近乎平行于表面的方向上生长。
13.
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
14.
Analyses of cause for transverse cracks on CC slab surface
连铸板坯表面横向裂纹产生原因分析
15.
Analysis of Fundamental Frequencies of Rotating Shafts with Transverse Crack;
含横向裂纹的转动轴的振动基频分析
16.
Analysis on Performance of Axial Throughwall Crack Pipeline Repaired by Sleeve
轴向穿透裂纹管道套管修复性能研究
17.
Analysis on the vibration characteristics of cracked beams subjected to axial force
轴向压力影响下裂纹梁振动特性分析
18.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析