1.
Study on Curve of Pressure-thickness of MDF Mat and Its Application
中纤板压力-板坯厚度曲线的研究与应用探讨
2.
Study on Solidified Shell Thickness Measurement and the Solidified Shell Shape of Slab
连铸板坯坯壳厚度测定及凝固壳形貌模拟研究
3.
Bending of thick rectangular plates with adjacent simply supported andtwo-fixed edges under hydrostatic pressure;
复杂边界厚矩形板在静水压力作用下的弯曲
4.
Applying RTM to Resolve the Bending of Thick Rectangular Plates under Hydrostatic Pressure;
功的互等法解静水压力作用下厚矩形板的弯曲
5.
Bending of thick rectangular plates with adjacent simply supported,one fixed and one free edges under hydrostatic pressure
静水压力作用下复合边界条件厚矩形板的弯曲
6.
Slab: rectangular in cross-section, with rounded corners and more than 5cm in thickness.
大板坯--横断面为矩形，圆角，厚度在5cm上。
7.
blade-thickness and rake diagram
桨叶倾角厚度曲线图
8.
Allowable rolling pressure for small-flexibility slab edging
热轧立轧小柔度板坯允许轧制压力的研究和应用
9.
Dynamic model of pressure positive feedback of gauge control during aluminium striproll
铝板轧制压力正反馈厚度控制的动态模型
10.
Discussion about Calculating Mode of Solidifying-skull's Thickness in Jinan Steel's Slab CCM
济钢板坯铸机凝固壳厚度计算模型的探讨
11.
Billet Surface Temperature Measuring in the Thick Board Factory of Jinan Steel Group
钢坯表面温度检测系统在济钢中厚板厂的使用
12.
Bending for the Thick Rectangular Plates under Hydrostatic Pressure and Its Engineering Application;
静水压力作用下厚矩形板的弯曲问题及其工程应用
13.
Thickness or diameter, as of sheet metal or wire.
直径，厚度金属板的厚度或线的直径
14.
capillary pressure-saturation curve
毛细管压力-饱和度关系曲线
15.
Study on loading curve of variable blank holding force in sheet metal drawing process
薄板拉延过程中变压边力加载曲线的研究
16.
pressure-volume diagram
压容图,压力容积曲线图
17.
Study on the Temperature and Stress State of Thin Slab in Continuous Casting;
薄板连铸坯的温度与应力状态的研究
18.
Optimization of Continuous Bending and Straightening Curve of Vertical-Arc Slab Caster
直弧型板坯连铸机连续弯曲矫直曲线的优化研究