1.
Manufacturing of Ultra-high-strength 18Ni Cobalt-free Maraging Steel
超高强度18Ni无钴马氏体时效钢的生产
2.
Radial-shrinkage mechanism of 18Ni Co-free maraging steel thin-wall pipes
18Ni无钴马氏体钢薄壁管径缩机理研究
3.
Outline of Strengthening Ways in 18Ni Maraging Steel
18Ni马氏体时效钢强化方法概述
4.
Microstructure of Co-free maraging steel and defect analysis of electron beam weld joints
无钴马氏体时效钢电子束焊接缺陷的微观研究
5.
The Microstructure and Mechanical Properties Research of Flow Forming T-250 Co-free Maraging Steel;
旋压态T-250无钴马氏体时效钢的组织与性能研究
6.
Investigation on Strength-Toughness Mechanism of Low Nickel, Cobalt Free Maraging Steel
低Ni无Co马氏体时效钢强韧化研究
7.
Aging Behavior and Grains Refining of 3J33 Maraging Steel
3J33马氏体时效钢时效行为及晶粒细化
8.
A Study on Aging Dynamics of Maraging Stainless Steel 00Cr13Ni7Mo4Co4W2Ti
00Cr13Ni7M04C04W2Ti马氏体时效钢的时效动力学研究
9.
Effects of Mn on Mechanics Properties of 20Cr-18Ni-6Mo Austenitic Stainless Steel
Mn元素对20Cr-18Ni-6Mo奥氏体不锈钢力学性能的影响
10.
twelve-two maraging stee
十二-二镍锰马氏体时效钢
11.
AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL
高强高韧FV520B马氏体钢的时效工艺优化
12.
Relationship Between Grain Size and Aging Behavior of Co-Free Maraging Steel
T250马氏体时效钢晶粒尺寸对时效析出的影响
13.
Assessment of Recovery Characteristics Occurred in Cold Rolled Maraging Steel with X-Ray Diffraction Techniques
用X射线评价马氏体时效钢冷轧材的回复效应
14.
Study on Tool and Chip Contact Area DeformationTest for Martensite Ageing Steel Cutting
马氏体时效钢的刀-屑接触区变形试验研究
15.
Influence of Heat Treatment Technology on Structure and Property of Maraging Steel;
热处理工艺对马氏体时效钢组织及性能的影响
16.
DEVELOFMENT OF MARAGING STEEL METAL POWDER-CORED WIRE FOR TIG SURFACING DIE;
TIG模具堆焊马氏体时效钢金属粉芯焊丝的研制
17.
Study on Non-Metallic Inclusions in Maraging Steel Produced by Electroslag Remelting Process
电渣重熔马氏体时效钢中的非金属夹杂物研究
18.
Research on grain refining of 18% Ni maraging stell hot extrusion tube
18%Ni马氏体时效钢热挤压管晶粒细化的研究