1.
Research on Intelligent Recognition and Control of Flatness for Thin-Gauge Roll Casting;
薄带坯铸轧板形智能识别与控制系统研究
2.
Deformation microstructure and characteristics of cast-rolling and normal rolling AZ31 magnesium alloy sheets
AZ31镁合金铸轧和常规轧制板的变形组织及形变特征
3.
Cavity evolution behavior of twin-roll-cast AZ31 alloy sheet during hot deformation
AZ31镁合金铸轧板材的热变形空洞演化行为
4.
Microstructural Evolution of Cast-rolling and Normal Rolling AZ31 Magnesium Alloy Sheet
AZ31镁合金铸轧和常规轧制板拉伸变形的组织演变
5.
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
薄板坯连铸连轧（CSP）轧制区组织模拟
6.
Study on the Thermo-mechanical Coupling Behavior and the Flatness Problem during Twin-roll Casting of Aluminum Strip;
铝带坯双辊铸轧系统热力耦合行为及板形问题研究
7.
A sheet of hammered, rolled, or cast metal.
金属板锻造、轧制，或铸造而成的金属板
8.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
9.
Investigation on Magnesium Alloy Sheet Manufactured by Strip Casting and Downstream Rolling;
铸轧—二次轧制法制备镁合金薄板的研究
10.
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺
11.
Tube Casing Steel J55 is Produced in FTSR
薄板坯连铸连轧生产石油套管用J55热轧钢带
12.
On Microstructure and Texture in the 3004 Aluminium Alloy for Cast Rolling Plate
3004铝合金铸轧板的组织与织构研究
13.
Study on Homogenization of Al0.8Mn0.5Fe Stock Alloy Strips by Continuous Cast-rolling;
Al0.8Mn0.5Fe合金铸轧板坯均匀化研究
14.
Study on Rolling Process of AZ31 Mg Alloy Plate Fabricated by Horizontal Continuous Casting;
AZ31镁合金水平连铸板材轧制工艺研究
15.
Experimental Study on Roll-casting of AZ91D Semi-solid Magnesium Alloy Strip;
AZ91D半固态镁合金铸轧板带实验研究
16.
Research on Semisolid Casting-rolling Bonding of Steel-backed Al-28Pb Bonding Plate;
钢背Al-28Pb复合板半固态铸轧复合研究
17.
THE PRODUCING STATUS OF THIN SLAB CONTINUOUS CASTING AND ROLLING IN CHINA
我国薄板坯连铸连轧工艺的生产现状
18.
Producing 3004 aluminum alloy deep-drawing slabs by casting-rolling method
采用铸轧法生产3004铝合金深冲板坯