1.
The regulators are mainly used in Oxygen, Acetylene, Hydrogen etc. gases decompression. It has the double一 function of reducing steading the gas pressure.
主要用于氧气、炔、气等高压气瓶的减压装置,有降压和稳压两种作用。
2.
Design and Simulation of 40MPa High Pressure Gas Bottle Made of TC4;
40MPa钛合金高压气瓶的设计及仿真
3.
Design on Salary System for the Sales Department in Dongji Company;
东基集团高压气瓶厂销售人员薪酬体系设计
4.
Study of Electron Beam Welding Process for High-pressure Sphere Tank of TC4 Titanium Alloy
TC4钛合金球形高压气瓶赤道缝电子束焊接研究
5.
Structural design and weaving of preformed fabric for manufacturing composite high-pressure cylinder for gases
复合材料高压气瓶用预成型织物的设计与织造
6.
The regulators are mainly used in Oxygen, Acetylene, Hydrogen etc. gases decompression.It has the double 一 function of reducing steading the gas pressure.
主要用于氧气、乙炔、氢气等高压气瓶的减压装置,有降压和稳压两种作用。
7.
All gases shall be supplied from Pressurized Gas Cylinders except for plant/ instrument air that is supplied from the production facilities.
除了仪器空气(厂空气)工厂直接生产外,其余气体都是采用高压气瓶柜供气。
8.
2 High pressure gas cylinders are made of steel, aluminium alloys or composite materials. Cylinder valves need be permanently protected with a removable or permanent (open) cap.
高压气瓶是由钢制,铝合金,或复合材料制成的,瓶阀必须用活动的或不活动的防护帽保护。
9.
ANALYSIS ON EXPLOSION CASE OF A HIGH-PRESSURE GAS BOTTLE MADE OF 37Mn STEEL FOR EXTINGUISHER
37Mn高压消防气瓶爆炸原因分析及对策
10.
In the high-pressure system both oxygen and acetylene are used from high-pressure cylinders.
在高压法中,氧气和乙炔都取用于高压瓶。
11.
low pressure cylinder regulator
低压石油气瓶调压器
12.
Typically hydrogen is stored in pressure tanks as a highly compressed gas at ambient temperature.
常温下,氢气通常以高度压缩气体的形式,贮存于压力瓶中。
13.
EXPERIMENTAL AND SIMULATION STUDY ON BONFIRE TEST OF HIGH-PRESSURE HYDROGEN STORAGE VESSELS
纤维缠绕高压氢气瓶火烧温升试验及数值研究
14.
accumulator air-charging manifold
蓄压器充气阀箱压缩空气瓶充气阀箱
15.
Take the following precautions to prevent injuries caused by the improper handling of compressed gas cylinders.
提高如下警惕,以防止错误操作压缩气体钢瓶造成的伤害。
16.
The bush of the middle frame is a main part of the machine to produce oxygen bottle in a high pressure container factory.
“中模架衬套”是高压容器厂生产氧气瓶设备的主要配套构件。
17.
Contains of Oxygen Cylinder, Acetylene Cylinder, Oxygen Regulator, Acetylene Regulator, flashback arresters, high pressure flexible houses, cutting and welding kits, safety and protective equipment necessary.
包括氧气、乙炔瓶,氧气、乙炔减压表,回火器,高压软管,焊枪,割刀以及其他设备。
18.
Method for pneumatic test of dissolved acetylene cylinders
GB/T13003-1991溶解乙炔气瓶气压试验方法