1.
" Mechanical properties of fasteners--Stainless steel bolts,screws, studs and nuts"
"GB/T3098.6-1986紧固件机械性能不锈钢螺栓,螺钉,螺柱和螺母"
2.
Service of check valve components shall be through a single stainless steel access cover secured with stainless steel bolts.
维修止回阀部件应该通过唯一的用不锈钢螺栓紧固的不锈钢检修盖进入进行。
3.
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固,应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
4.
Stainless steel stuffing box hardware is standard (ie. bolts, gland studs, nuts, washers).
标准的金属密封不锈钢填料箱(如螺栓、填料压盖螺栓、螺母、垫圈)。
5.
Cable connections are made to the side of the battery by means of threaded bolts into "cast-in-lead" stainless steel nuts.
在蓄电池一侧,利用螺栓拧到“镶铸铝”的不锈钢螺帽上进行馈线连接。
6.
These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
7.
stainless steel heavy hex nuts
不锈钢六角重型螺帽
8.
stainless steel nylon insert lock nuts
不锈钢尼龙嵌入螺帽
9.
For example, high strength reinforced bar, stainless steel medium plate, auto wheel rim steel and so on.
高拉力螺纹钢筋,不锈钢中板,汽车轮网钢等。
10.
stainless steel flange nylon insert lock nuts
不锈钢六角轮缘尼龙螺帽
11.
All the fastening pieces are adopted the stainless steel screw.
所有的紧固件都采用不锈钢螺钉。
12.
Research on Thin-wall Spiral Weld Stainless Steel Pipe Manufacturing Technology
薄壁螺旋缝不锈钢焊管制造技术研究
13.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型
14.
Stainless Steel/Stainless Steel Standard
不锈钢/不锈钢 标准型
15.
Stainless Steel/Stainless Steel Dome Head
不锈钢/不锈钢 圆头型
16.
Stainless Steel/Steel Dome Head
不锈钢/钢 圆头型
17.
Stainless Steel/Steel Countersunk
不锈钢/钢 沉头型
18.
Stainless Steel/Steel Standard
不锈钢/钢 标准型