1.
Cause of Corner Crack of Continuous Cast Billet in Laiwu Steel No.5 Continuous Casting
莱钢5号连铸机连铸坯角部裂纹成因分析
2.
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
3.
Study on Transversal Corner Crack of 15Mn2CrVNb Bloom for Wagon Brake Beam Manufacturing
货运机车制动梁用15Mn2CrVNb钢方坯角部横裂纹研究
4.
Numerical Analysis of Transversal Crack on Slab Corner in Straightening During Continuous Casting
连铸矫直过程板坯角部横向裂纹数值分析
5.
A segment of the box corner was removed with a hole saw in order to permit an examination of the crack.
为了对裂纹进行检查，用圆孔锯从箱型断面拐角处锯下一部分。
6.
The Causes of Formation and Measures of Control about Corner Transverse Cracks on Slab with Nb Alloy in Ansteel 2150 mm ASP Product Line
鞍钢2150mm ASP生产含铌合金钢铸坯角部横裂纹的成因及控制
7.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
8.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
9.
All existing web cracks were arrested by drilling 19 mm holes at the ends of the cracks.
所有已存在的腹板裂纹都在裂纹端部钻19mm的孔止裂。
10.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
11.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
12.
Synopsis This paper analyzes the reasons of forming longitudinal corner cracks for continuous casting billet of electric arc furnace and puts forward corresponding precaution measures.
通过分析电炉连铸坯产生角部纵裂纹的原因,提出了具体的控制措施。
13.
Subsurface Crack Initiation and Propagation Mechanism in GCr15 Steel;
GCr15钢内部裂纹萌生和扩展机理的研究
14.
Studies on Crack Tip Fields and Conservation Laws in Hamiltonian System;
Hamilton体系下裂纹端部场及守恒量研究
15.
The Analysis of Formation Mechanisms of the Plate Containing Nb、Ti Central Cracking
含铌、钛船板钢心部微裂纹成因初探
16.
Analysis of stress intensity factors for corner crack in section Ⅰ-beam
工字型截面梁角裂纹的应力强度因子分析
17.
Stability Analysis of a Cracked Rotor Model Based on Whirling Angle
基于涡动角的裂纹转子模型稳定性分析
18.
The effect of crack distance and fiber angle on delaminations in laminated composites
裂纹间距及铺层角度对复合材料分层的影响