1.
Prediction Model of Coating Thickness in Hot-Dip Galvanizing
带钢连续热镀锌层厚度预测模型研究
2.
The required thickness of coating is obtained by the action of closed circuit control system above the molten zinc level (air knife).
通过气刀和镀层闭环控制系统对液态锌层厚度的调节使镀层厚度达到设定要求
3.
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个相同锌镀层厚度)
4.
Effect of Ni Content in Zn Bath on Thickness of Hot Dip Galvanized Coating
锌浴中镍含量对热浸锌镀层厚度的影响
5.
"To achieve good quality heavier coatings, srip roughness and pot chemistry must be appropriate for the combination of coating weight and line speed."
为取得良好的厚镀层,钢带粗糙度和锌锅内金属成分必须适应于镀层厚度及生产线速度。
6.
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet
常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度
7.
There was ten tenths cloud at that time.
当时云层厚度是十度。
8.
having a thickness made up of two layers or strands.
有两层或两股厚度的。
9.
having a thickness made up of four layers or strands.
有四层或四股厚度的。
10.
having a thickness made up of three layers or strands.
有三层或三股厚度的。
11.
pipe concrete coating thickness
管子混凝土加重层厚度
12.
minimum cover of reinforcement
钢筋保护层的最小厚度
13.
gravimetric coating thickness test
称重法涂层厚度测试
14.
A single thickness of a split hide.
皮厚一层被剥下的皮的厚度
15.
A film or layer of a compound one molecule thick.
单分子层一分子厚度化合物的膜或层
16.
The Rational Position and Thickness of Semi-rigid Base in Asphalt Pavement
半刚性基层合理层位与合理厚度研究
17.
Effect of Buffer Layer Thickness on Ge/Si Multilayer
缓冲层厚度对Ge/Si多层膜的影响
18.
A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
热浸镀锌层引起疲劳强度的显著降低。