1.
Analysis of Effect Facts on a Penalty Finite Element Method for the Full Plastic Fractural Problems;
纯幂律全塑性裂纹有限元方法计算中影响因素分析
2.
Influence of fatigue crack tip plastic zone on crack propagation behavior in TC4ELI alloy
TC4ELI合金疲劳裂纹尖端塑性区对裂纹扩展的影响
3.
Evaluation of Plastic Damage at Crack tip of 45 # Steel with Ultrasonic Method
45~#钢裂纹尖端塑性损伤的超声评估
4.
SOLUTION TO THE CRACK TIP PLASTIC ZONE FOR COMPOSITES
复合材料裂纹尖端塑性区的一种解法
5.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
6.
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
7.
Near Crack Line Plastoehstic Andysis of mode ⅢEdge Cracked Plates LoadedbyPoint Forces
Ⅲ型边裂纹受一对集中力时裂纹线场的弹塑性分析
8.
The Research of J～* Integral in Elastic-Plastic Fracture Mechanics and Fracture Criterion for Mixed Mode Crack Propagation;
弹塑性断裂力学之J～*积分与复合型裂纹扩展断裂准则的研究
9.
Fracture criterion for mixed mode crack of composites based on the crack tip plastic zone
基于裂尖塑性区的复合材料复合型裂纹断裂准则
10.
Anisotropic Plastic Stress Fields at a Slowly Propagating Crack Tip
缓慢扩展裂纹尖端的各向异性塑性应力场
11.
Study on Ductility Dip Cracking Sensitivity for Incone1690 Electrode Filler Metal;
Incone1690焊条熔敷金属高温低塑性裂纹敏感性研究
12.
THE CHARACTERIZATION OF PLASTICITY INDUCED FATIGUE CRACK CLOSURE BASED ON NUMERICAL ANALYSIS
疲劳裂纹塑性闭合特性的数值分析方法
13.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
14.
Higher-Order Asymptotic Solution of Growing Cracks in Elastic Perfectly Plastic Media
理想弹塑性材料扩展裂纹尖端场高次渐近解
15.
The Elastic-viscoplastic Field at the Tip of a Dynamic Propagating Crack in Power-hardening Materials
幂硬化材料动态扩展裂纹尖端的弹粘塑性场
16.
Boundary Element Method for Elastoplastic Bimaterial Interface Crack Problems;
弹塑性双材料界面裂纹问题的边界元法
17.
Investigation into the Mechanism for the Effect of Nb and Ti on Ductility Dip Cracking Susceptibility;
Nb和Ti对高温失塑裂纹敏感性影响机理研究
18.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析