1.
VIM Refining Extra-Low Oxygen Steel using CaO Crucible
用氧化钙坩埚真空感应熔炼超低氧钢
2.
Deoxidizing Dynamics of Refining Extra-Low Oxygen Steel during VIM in CaO Crucible
用氧化钙坩埚真空感应熔炼超低氧钢的脱氧动力学
3.
Production of Low Oxygen Content GCr15 Bearing Steel by the Process of 60 t LD-LF-VD-CC
60t LD-LF-VD-CC工艺生产低氧GCr15轴承钢
4.
Total oxygen content control of ULC steel in the process of RH treatment
RH处理超低碳钢中总氧含量的控制
5.
A Model for Predicting the Total Oxygen of Steel in the Process of RH Treatment
RH处理超低碳钢中总氧含量预报模型
6.
A STUDY ON ARGON-OXYGEN COMBINATION BLOWING PROCESS FOR LOW-CARBON CAST STAINLESS STEEL
氩-氧复合吹炼法生产低碳不锈铸钢的试验研究
7.
Effects of pH Value and Dissolved Oxygen on Pit Initiation Behavior of Mild Steel
pH值和溶解氧对低碳钢点蚀诱发的影响
8.
Influence of cerium oxide on mechanical properties of low alloy steel electrode
氧化铈对低合金钢焊条力学性能的影响
9.
Mechanical properties of brazing joint of alumina ceramics to mild steel
氧化铝陶瓷与低碳钢钎焊接头的力学性能
10.
Total oxygen prediction model of ultra-low carbon aluminum killed steel in RH treatment and its application
RH处理超低碳铝镇静钢的总氧预测模型及应用
11.
Study on Manual Gas Cutting Craft with Oxygen-acetylene Flame for Low-carbon Steel Thin Plate
低碳钢薄板氧-乙炔火焰手工气割工艺研究
12.
Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal
氧化铈对低合金钢焊条熔敷金属的影响
13.
Influence of aerobic bacteria on corrosion inhibition of oil bushing steel in the oilfield stratum water
好氧细菌降低油田采出水对管钢腐蚀的研究
14.
The Welding Technology between Red Copper and Low Carbon Steel Profile in Pressure-oxygen Gun of Steel-Smelting Converter;
转炉炼钢高压吹氧枪头紫铜与低碳钢异种金属的焊接工艺
15.
Characterization of hafnium oxide coatings on low activation Martensitic steel at various O_2/Ar flow ratios
氧氩比对低活化马氏体钢表面氧化铪涂层性能的影响
16.
cold-rolled carbon steel
冷轧碳钢, 低碳钢
17.
dead-melted steel
镇静钢, 全脱氧钢
18.
The results shows that the oxides of the steel ball surface act as antiwear when in low sliding speed;
研究表明:当以较低速度滑动时,钢球表面的氧化物起到抗磨作用;