1.
Study on Boronizing Process and the Structure and Properties of Boride Layer of 4Cr13 Stainless Steel;
4Cr13不锈钢渗硼工艺及渗层组织和性能的研究
2.
Investigation on microstructures and properties of AZ91D magnesium alloy surface zinced layer
AZ91D镁合金表面渗锌渗层组织及其性能研究
3.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
4.
Microstructure and Bending Deformation Behavior of Fe-based Infiltrated Layer on Copper Substrate
铜合金表面铁基渗层组织与弯曲行为
5.
Study of the Structure and Properties of Coatings Infiltrated Multi-elements on Two Kinds of Valves Steel;
两种气阀钢多元共渗层组织及性能的研究
6.
Microstructure and hot corrosion resistance of aluminosiliconized layer on nickel-base superalloy K4104
K4104镍基高温合金Al-Si渗层组织与抗热腐蚀性能
7.
Influence of Cu and RE on Cast-penetrated Layer on Medium Carbon Steel
铜及稀土元素对中碳钢铸渗层组织性能的影响
8.
Microstructure of RE-B-Al Diffusion Layer of Armco Iron and the Formation Mechanism of Borides
工业纯铁稀土硼铝共渗的渗层组织及硼化物的形成机理
9.
Influence of plasma carburizing temperature on microstructure and properties of carburized layer for AISI 316L stainless steel
离子渗碳温度对316L不锈钢渗层组织和性能的影响
10.
The Cray Iron Surface Chromium Infiltrates the Level Organization Appearance and the InCredient Characteristic Research;
灰铸铁表面渗铬层组织形貌及成份特征的研究
11.
The Study on Microstructures and Properties of the Surface Composite Infiltrated Layer;
铜合金表面复合渗层的组织与性能研究
12.
Study of Properties and Microstructure of Dip Aluminized Layer of Carbon Steel Surfaces
碳钢表面渗铝合金层组织及性能的研究
13.
Effect of RE Elements on the Microstructure and Properties of Aluminizing Layer of 40Cr Steel
稀土元素对40Cr钢渗铝层组织性能的影响研究
14.
Microstructure and Hardness of Cr,B,C Ternary Cast-infiltrated on 45 Steel Surface
45钢表面铬、硼、碳三元铸渗层的组织和硬度
15.
Structure formation of Si-Y_2O_3 co-deposition coatings on Nb-silicide-based alloy
铌硅化物基合金Si-Y_2O_3共渗涂层的组织形成
16.
Structure and Tribological Properties of Plasma Niobized 45 Steel
45钢双层辉光等离子渗铌的组织及摩擦性能
17.
Effect of boron on composition and microstructure of the siliconized layers prepared by electrodeposition in molten salts
硼对熔盐电沉积渗硅层成分及组织结构的影响
18.
Relation Analysis Between Structural Characteristic of Inlaying Pistons Iron-aluminum Bonding Layer and Aluminizing Process
镶嵌活塞铁铝粘结层组织特征与渗铝工艺研究