1.
Research on Sintering with Big Scale Proportion at TISCO
太钢烧结大比例配用铁鳞的试验研究
2.
The Study on the Use of Jianshan Flotation Tailings at TISCO
太钢烧结配用尖山浮选尾矿的试验研究
3.
Effect of Taisteel Sintering Process Parameters on Flue Gas Composition Variation
太钢烧结过程参数对烟气成分变化的影响
4.
Research and Practice on Improvement of Taisteel Sinter Alkalinity Stability
提高太钢烧结矿碱度稳定性的研究与实践
5.
Practice of Adding High Ratio Quicklime Stably for Taisteel 450m~2 Sinter Machine
太钢450m~2烧结机高比例稳定配加生石灰的实践
6.
Analysis and Treatment of Vibration of Main Exhauster for Taisteel 450m~2 Sinter Machine
太钢450m~2烧结机主抽风机振动的分析与处理
7.
Study on sintering process of P/M M42 high speed steel prepared by spark plasma sintering
SPS烧结M42粉末高速钢的烧结工艺研究
8.
STUDY OF IMPROVEMENT COMPOSITION OF SINTER’GRAIN SIZE IN No2 SINTERING PLANT OF THE XIANGGANG
改善湘钢二烧烧结矿粒度组成的研究
9.
An Experiment of Deep Bed Sintering at East Anshan Sintering Plant of AISC
鞍钢东烧厂烧结配碳和配矿试验研究
10.
INDUSTRIAL AGGLOMERATING TEST TO ADD TITANIUM CONCENTRATE FROM NEW ZEALAND
承钢烧结厂配加新西兰钛精矿烧结工业试验
11.
Research on the Gas Permeability in the Acid Pellet Sintering Process;
酒钢球团烧结法新工艺烧结过程透气性研究
12.
Effects of Sintering Atmosphere on Sintered Properties of Stainless Steel Powders;
烧结气氛对不锈钢粉末烧结性能的影响
13.
Practice of Improving the Sinter Strength on the 90m~2 Sintering Machine in MaSteel;
马钢90m~2烧结机提高烧结矿强度的实践
14.
Practice About Raising Tumbler Strength of Western Zone Sinter on Ansteel
鞍钢西区烧结提高烧结矿转鼓强度的实践
15.
Laigang 3×265m~2 sintering machine waste heat sinter take full advantage of the practice
莱钢3×265m~2烧结机烧结矿余热充分利用的实践
16.
Point at the properties of Taigamg BF burden composition and the raw material of sintering, the necessity and outlook of using MPS technique were analyzed.
针对太钢高炉的炉料结构和烧结原料特点,分析了在该厂推广应用小球团烧结技术的必要性和前景。
17.
Investigation of the Power on the MC Cell Firing Process
太阳能电池烧结过程中烧结炉的功率优化设置
18.
Rebuild Main Workshop Building for 180m~2 Sintering Machine of No.1 Sintering Workshop in Iron-making Plant
包钢炼铁厂一烧车间180m~2烧结机主厂房改造