1.
Influences of the Anti-Welding Heating Processing Method on Corrosion Resistance and Fatigue Resistance of 16MnR Steel
逆焊接加热处理对16MnR钢抗腐蚀及疲劳性能的影响
2.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
3.
The Hot Characteristic of Narrow Gap Welding with the Arc Constricted by Flux Strips;
窄间隙焊接中焊剂带约束电弧的加热特性
4.
Welding of electric heating element used for pressurizer
核一级设备稳压器电加热元件的焊接
5.
Development of Inductive Heater in Butt-fusion Welding Machine for Pressurized Plastic Pipes;
塑料压力管道热熔对接焊机感应加热板的研制
6.
The Application of Electric Heater in Welding Preheating for Rotating Wheel of Water Turbine
电加热器预热在水轮机转轮焊接中的应用
7.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
8.
"If sweat fittings are used, do not apply heat to the nipples on top of the heater."
如果使用焊接管道,不要在热水器顶部的螺纹接头上加热。
9.
The Principles of Heating and Electrie Saving by Means of Far-infrared Technigue and Its Applications to Welding
远红外加热节电原理及其在焊接中的应用
10.
Simulation of Relieving Welding Residual Stresses in the Girth-weld Stainless Steel Tube by Induction Heating Method
感应加热消除不锈钢管焊接应力数值模拟
11.
Application of Frame Electric Heater for Elimination Residual Stress
框架式电加热器在消除焊接残余应力中的应用
12.
To this day there is still ongoing controversy about whether to expand first or weld first the tube to tube-sheet joint in heat exchangers.
管壳式换热器中管子与管板胀焊结构接头的加工制作，是先焊后胀还是先胀后焊，至今仍有争论。
13.
Using the heat of welding to vapour water, cooling rates are lowered on the weld bead and heat -affected zone.
利用焊接时的加热使水汽化，不仅使焊道而且使热影响区的冷却速度减慢。
14.
cooling after postweld heat treatment
焊接热处理之后的冷却
15.
synthetic apparatus for weld thermal cycle
焊接热循环模拟装置
16.
Apply heat with flame directed away from the center of the valve body. Excessive heat can harm the seats. After soldering, the packing nut may have to be tightened.
在用明火加热时不要直接施加在阀体中心上。过热可能损害阀座。焊接后，填料螺母可能需要紧固。
17.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
18.
The necessarily of post-weld heat treatment of spherical tanks was emphasized.
强调了焊接球罐焊后热处理的必要性。