1.
The fatigue fracture of test alloys has mixed-rupture characteristics of quasi-cleavage and dimples.
合金的疲劳断口呈现出准解理与韧窝断裂的混合特征。
2.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
3.
The tesile fracture is mixture of quasicleavage and touph dimple.
拉伸断口为韧窝和准解理混合断裂。
4.
The steel trea-ted with this pruccss shows a fractograph with quasi-cleavage and dimple。
钢的断口为准解理十韧窝属于韧性断裂。
5.
The composite displays the fracture features of the dimple and intergranular fracture.
复合材料的断裂形貌为韧窝加沿晶断裂。
6.
The fracture of composites assumes toughness dimple.
复合材料的拉伸断口为解理与韧窝混合断裂.
7.
Whereas the alloy with low Na content exhibited ductile fracture with dimples.
而钠含量较高的合金发生韧性断裂,断口为韧窝型.
8.
By way of suitable heat treatment, the tensile fracture morphology changes from brittle intercrystalline fracture to dimple fracture, so the strength and ductility of the alloy is increased.
采用适当的热处理工艺可使合金强韧化 ,拉伸断口由脆性的沿晶断裂变为韧窝状断裂。
9.
Fracture surfaces show predominant cleavage river pattern with a small quantity of dimples in the core.
硅钢断口边缘呈现解理断裂的“河流花样”,心部存在少量的韧窝。
10.
High manganese steels undergo a ductile to brittle transition at low temperature, which is accompanied by a change in the fracture mechanism from dimple fracture to intergranular fracture.
高锰奥氏体钢随温度降低其断裂机制由韧窝状断裂转变到晶界断裂。
11.
Riverlet pattern, secondary cracks and dimples were visible on the fracture surfaces. The fracture morphology was of cleavage character.
疲劳断口可见河流花样、次裂纹、韧窝,具有解理特征.
12.
Imaging research of femoral intercondylar notch stenosis induced by anterior cruciate ligament tears
前交叉韧带断裂后股骨髁间窝变化的影像学研究
13.
The feature of the fracture surface was examined by SEM and three kinds of fracture mechanisms were determined as follows; 1. quasi-shear fracture; 2. dimple fracture, and 3. quasi-cleavege.
通过扫描电镜对断口进行分析,确定了三种基本断裂机制:(1)准切变,(2)韧窝;
14.
AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK
切口断裂韧性与裂纹断裂韧性之间关系的探讨
15.
breaking tenacity
断裂强度,抗断韧度,断裂强力
16.
Fracture Toughness and Failure Curve of 22NiMoCr3-7 Steel in Ductile-Brittle Transition Range
22NiMoCr3-7钢韧-脆转变区断裂韧度及断裂失效曲线
17.
Its microstructure include: dimple, plastic intererystalline, cleavage and mixed fracture.
高锰钢微观断口有:韧窝断口、塑性沿晶断口、解理断口及混合断口。
18.
Cross Sections Measurements of Femoral Intercondylar Notch and Anterior Cruciate Ligament by 3D TSE MRI
股骨髁间窝和前交叉韧带断面的3D TSE MRI测量