1.
Finite Element Simulation for Blanking Process of Thick Sheet Metal and Optimize Parameter;
厚板冲裁过程的模拟仿真及其参数优化
2.
Mechanism of Small Hole Punching on Thick Blank and Study on Die Life-span;
厚钢板小孔冲裁机理及模具失效研究
3.
die-cutting machine, for paper or paperboard
纸张或纸板冲压裁剪机
4.
Large area of cutting platen makes it possible to cut largesized materials.
◆ 裁断压板面积大，可冲裁大尺寸材料。
5.
Study on Contact-impact Dynamic Response of the Die in Sheet Metal Stamping;
板料冲裁过程中模具的碰撞响应研究
6.
Heat Treatment Technics Experiment for Punching & Stamping Die of 65Nb Plate
65Nb钢链板冲裁模具热加工工艺试验
7.
The Procedure and Mechanics Research of Precision Blanking Deformation of Thin Sheet Metal
薄板精密冲裁的变形过程和机理研究
8.
Study on Nonlinear Punching Shear Damage Process Imitation of Thick Raft Foundation;
厚板筏基础非线性冲切损伤过程模拟
9.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究
10.
Simulation for Fine Blanking Process of Sheet Metal and Optimization Parameter;
板材精密冲裁过程的数值模拟及参数优化
11.
Here, it flows over boards thickly coated with grease.
在冲洗桌上，压碎的岩石从涂着厚厚油脂的板子上流过。
12.
Experimental Investigation of Thick Sheet Fine-blanking Technical Parameters and Numerical Simulation;
厚板精冲工艺参数试验研究及有限元分析
13.
Cause Analysis of Unqualified Low Temperature Toughness of Q345E Heavy Plate
Q345E厚板低温冲击性能不合原因分析与对策
14.
Coupled Thermal-mechanical Analysis of Plastic Shear Zone and Die Damage in Thick Plate Fine Blanking Process
厚板精冲塑性剪切带热力耦合分析与模具失效
15.
The Study on the Impact Toughness Test of the Thick Steel Plate SA387Gr11CL2 Welded Joint
厚壁钢板SA387Gr11CL2焊接接头冲击韧性试验研究
16.
Effects of simulated PWHT on impact properties of 12Cr2Mo1R steel heavy plate
模拟焊后热处理对12Cr2Mo1R厚钢板冲击性能的影响
17.
Comparison on the punching force of negative clearance blanking and common blanking
负间隙冲裁与普通冲裁的冲裁力研究
18.
Round and square perforation plate screens-Thickness of below 3 mm
GB/T10612-1989板厚筛板