1.
EQUIPMENT AND TECHNOLOGY COMPARISON OF THE SOLID STATE POLYCONDENSATION FOR PET CHIP
聚酯切片的固相增粘装置及工艺技术的比较
2.
The solid|state polycondensation laws of bright chips after bulking were predicted and was proved to be coincident with the experimental practice.
实验证明 ,增容后大有光切片固相增粘规律与预测一致。
3.
non-dispersed beneficiated low solids mud
非分散增效低固相泥浆
4.
glass-reinforced thermosetting plastics (grp) pipes and fittings-test methods to prove the design of cemented or wrapped rigid joints
玻璃增强热固塑料(GRP)管和配件-粘合和粘合部位的试验方法
5.
The Fracture and Bond Performances of Fiber Reinforced and Rehabilitated Concrete;
纤维增强与加固混凝土断裂与粘结性能
6.
Study on the Toughening and Durability of Adhesive Materials Used for Strengthening Concrete Structure with CFRP;
CFRP加固混凝土用粘结材料的增韧及耐久性研究
7.
The continuous phase must increase in order to decrease viscosity.
连续相必须为减少粘滞性而增加。
8.
The Study on the Organoclay Prepared by Solid State Method and Its Application in Polymers;
固相法改性粘土及其在聚合物中的应用研究
9.
The apparent viscosity at the point decreases distinctly with shear rate increasing.
随着剪切速率的增加,转相点的视粘度明显下降.
10.
Study on compatibility of pyridyl-functionalized SBS and various tackifiers
极性化SBS/增粘树脂共混物的相容性研究
11.
But sometimes starches and waxes may be more firmly fixed during singeing, making desizing more difficult.
但有时浆料和蜡质在烧毛后会牢固地粘在织物上,增加退浆的困难。
12.
Meamwhile, the effect of reconsolidation index to the post cyclic shear strength increment is analyzed.
同时,分析了循环荷载作用下再固结系数对粘土强度增长的影响。
13.
Studies on Static and Dynamic Property of Multi-beam Bridges Retrofitted with Adding Main Girders or CFRP;
增加主梁法和粘贴碳纤维法加固梁桥的静动力特性研究
14.
Study on toughening of epoxy adhesives cured at room temperature for preparation of membrane module
膜组件浇铸用室温固化环氧树脂胶粘剂的增韧研究
15.
CLINICAL STUDY OF APC IN THE TREATMENT OF ATYPICAL ESOPHAGEAL DYSPLASIA
氩等离子凝固治疗食管粘膜不典型增生的临床观察
16.
Is the program geared to a fixed salary increase schedule?
方案能同固定的薪金增长表相适应吗?
17.
Is the program geared to a fixed salary increase schedule
这一方案能同固定工资增长相适应吗?
18.
adhesiven,glue substance for filling holes in teeth
（补牙用的）粘固粉.