1.
High-melt-viscosity polypropylene prepared by PP/EPDM reactive extrusion blending method
PP/EPDM反应挤出共混制备高熔体黏度PP的研究
2.
Study on PP/POE Blends Prepared by Intern Mixer and Extruder
密炼机/挤出机对PP/POE共混体系的影响
3.
Continuous Extrusion Foaming of Polypropylene/ Polydimethylsiloxane Blend
PP/PDMS共混物的连续挤出发泡成型
4.
The Melt Flow Instability of LLDPE, LDPE and Their Blends at High Speed Extrusion;
LLDPE、LDPE及其共混物高速挤出流动不稳定性的研究
5.
Extrusion Flow Instability of Polythene and Its Blends;
聚乙烯及其共混物挤出流动不稳定性的研究
6.
Study of HDPE Barrier Composite Material by Blending Extrude Method;
共混挤出法制备HDPE阻隔复合材料的研究
7.
MORPHOLOGY DEVELOPMENT RESEARCH OF POLYSTYRENE/POLY(METHYL METHACRYLATE)BLEND IN SINGLE SCREW EXTRUDER
单螺杆挤出机中PS/PMMA共混物形态演变的研究
8.
The pressure oscillation can be suppressed by either raising extrusion temperature or adopting blending modification.
升高挤出温度和采用共混改性都可抑制压力振荡现象。
9.
Study on Filler Modification of UHMW-PE and Its Force-Lubrication Extrusion by Co-Rotating Twin Screw Extruder;
UHMW-PE填充共混改性及实施双螺杆强制润滑板材挤出的研究
10.
Study of Microstructure and Rheological Properties of PP/PS Blend in Single Screw Extruder
单螺杆挤出机中PP/PS共混物微观结构及其流变性能的研究
11.
It is difficult to squeeze one's way out in a crowded bus.
在拥挤的公共汽车里挤出去真不容易。
12.
Multilayer co-extrusion feedblock, allowing for coextrusion of up to 7 kinds of raw materials.
多层共挤复合分配器,最多达七种成份原料共挤复合挤出。
13.
The flow properties of linear low density and low density polyethylene blend( LLDPE/ LDPE) under the extrusion conditions were investigated with capillary rheometry.
应用毛细管流变仪,考察了挤出条件下LLDPE/DPE共混物熔体的流动性及其影响因素。
14.
Study on the Processing-Rheology-Morphology Relationships of Polymer Blends in a Modular Intermeshing Co-rotating Twin Screw Extruder and Its Sub-cluster Statistical Theory;
啮合同向双螺杆挤出过程中聚合物共混体系流变相态学及其群子统计理论的研究
15.
Design of the Extruding Die for Compound Triple-Layer Plastic Pipe by Two Extruding Machines
两台挤出机共挤复合三层塑料管材的机头设计
16.
The Design and Analysis of the Novel Screw Extruder of Coextrusion in One Extruder;
新型单机共挤螺杆挤出机的设计及分析
17.
Study of Crowding-out and Crowding-in Effect of Public Investment Versus Private Investment
公共投资对私人投资的挤出挤进效应分析
18.
Characterization of Mixing Interface Tracing in Single Screw Extruder
单螺杆挤出机混合过程界面追踪表征