1.
According to the theory of bearing forces and deformations, this paper gives distribution laws of the shearing stresses in the side fille welds of overlap connection with comparative accuracy.
依据受力与变形理论,较为精确地给出了搭接接头侧面角焊缝中的剪应力分布规律。
2.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
3.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
4.
Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures
高温后正面角焊缝抗拉剪切强度的试验
5.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
6.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
7.
Both single and double fillet welds shall be as follows unless otherwise shown on the drawing.
除非图上另外标明，所有单、双面贴角焊缝高度如下。
8.
Process model of arc corrugation on friction-stir weld
搅拌摩擦焊焊缝表面弧形纹形成模型
9.
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
10.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
11.
Application of ultrasonic sensor in automatical welding of right-angle welding seam
超声波传感器在直角焊缝自动焊接中的应用
12.
Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
焊工操作手法对不锈钢薄板角焊缝质量的影响
13.
Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe
外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响
14.
Analysis of Bubbling on the Surface of FSW Welding Seam
2A14铝合金搅拌摩擦焊焊缝表面鼓包原因分析
15.
A Research into the Basic Formulation of the Calculation of the Welded Seam Strength of Right-Angle Welded Seam;
关于直角角焊缝强度计算基本公式的探讨
16.
The main features are that the back surface weiding seams are even, smooth and weld edge tidy, excellent in performances of welding technology and welding seam dynamics.
主要特点是背面焊缝匀称、光滑，焊趾整齐，焊接工艺性能及焊缝力学性能优良。
17.
Effect of Aluminum Alloy Surface Absorptivity on Weld Shape
铝合金表面吸收率对焊缝成型的影响
18.
fracture of roll
轧辊表面的裂缝(掉角)