1.
Research of Multi-stage Vacuum Insulator Stack Flashover Probability Analysis Methods;
真空轴向绝缘堆闪络概率分析方法研究
2.
Pieces of wool had got themselves wound round the rollers of vacuum cleaner.
一些羊毛缠在了真空吸尘器的转轴上。
3.
The fatigue life of vacuum degased ball bearing steel and its influence factors
真空脱气轴承钢的疲劳寿命及影响因素
4.
It covers geometrically 86% of the 4t solid angle and has very low detection thresholds.
整个探测器系统轴向对称排列，工作在真空中。
5.
Research on Application of Vacuum Vapor Plating Technique for Forming Antifriction Alloy Coating on Bush
轴瓦减摩合金薄膜真空蒸镀技术的应用研究
6.
Study on Damage Mechanism of Solid Lublition Bearing in Vacuum Environment
真空环境中固体润滑轴承损伤机理研究
7.
Dynamic Analysis and Simulation of the Automotive Air Compressor's Crank-Rod Mechanism
车用空压机曲轴连杆机构的动力学分析与仿真
8.
reverse idler gear shaft bearing
回动空转齿轮轴轴承
9.
An axial symmetrical model is set up for the sealing structure of the bulkhead plate for a columniform dewar.
建立了针对柱形真空杜瓦容器端盖密封结构的轴对称模型。
10.
Zoom-FFT Approach with Application to Fault Diagnosis of Bearing in Vacuum Pumps;
频谱细化方法在真空泵轴承故障诊断中的应用研究
11.
Study on total oxygen content and micro inclusion of bearing steel GCr15 during RH vacuum process
RH真空处理GCr15轴承钢中全氧及显微夹杂物的行为研究
12.
Frictional Performance and Leakage of Ball Bearings Lubricated by Chlorphenyl Silicone oil in Vacuum
氯苯基硅油润滑球轴承在真空环境下摩擦性能与泄漏量研究
13.
Analytical Investigation on Strength and Main Bearing Lubrication of CA4D32 Diesel Engine Crankshaft System Based on a Simulation Technique;
柴油机曲轴轴系强度和主轴承润滑仿真研究
14.
"There are holes under the reed valve that connect to the engine carburetor. When the piston is moving up, a partial vacuum is produced in the sealed crankcase.
在片簧阀的下面有孔道与化油器相连。当活塞向上运行时,就会在密封的曲轴箱里产生部分真空。
15.
Numerical Simulation Analysis of Shaft Orbit for Hydraulic Generator Set;
水轮机主轴轴心轨迹的数值仿真分析
16.
Of, relating to, or used to create a vacuum.
真空的，与真空有关的，用来制造真空的
17.
Pressure-compensated air bearings are used on both ends of the trunnion axis.
耳轴两端各用一压力补偿空气轴承。
18.
Research on Reliability Technology for Main Shaft Bearings of Aircraft Engine;
航空发动机主轴轴承可靠性技术研究