说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 砂眼
1.
the tip of an abscess (where the pus accumulates).
砂眼的尖头(脓聚集的地方)。
2.
Causes and Solutions of Sand Hole in Steel Casting with Air Impact Molding
气冲造型铸钢件砂眼成因与解决措施
3.
The Mathematical Diagnosis of the Fridge Evaporator Sand Hole Equal Initial Depth;
电冰箱蒸发器砂眼平均初始深度的数学诊断
4.
Design and Exploitation for Controlling-online System of 06A Cylinder Block Sand-hole Objection
06A汽缸体砂眼缺陷在线控制系统的设计开发
5.
Oily or greasy surfaces repel fluxes, leaving bare spots that oxide and result in voids and inclusions.
油脂表面会排斥焊料,留下氧化物裸点,并导致砂眼和杂物。
6.
Centrifugal casting,compact structure,free from pinhole porosity and slag,smooth surface and even wall thickness.
高速离心铸造,组织致密,无砂眼、夹渣,表面光滑、壁厚均匀。
7.
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
高速离心铸造,组织致密,无砂眼、渣,表面光滑、厚均匀。
8.
Blisters are not acceptable. Improper adhesion which exposes bare metal is not acceptable.
砂眼不可以接受.暴露金属底材的电镀附著不可接受.
9.
partially sand packed perforation
地层砂部分充填的炮眼
10.
For a moment, the sandstone banks appeared, and in a flash they were gone.
砂岩的河岸出现在眼前,然后一闪即逝。
11.
There is a piece of dust in your eye but it should work out by itself.
你眼里有一点小砂粒,可它是会自己出来的。
12.
Research on Sandstone Borehole Enlargement Mechanisms and Prevention Technology in Lamadian Oil Field
喇嘛甸油田砂岩井眼扩大机理和预防技术研究
13.
Research and application of open-hole gravel pack sand control technique optimization in horizontal well
水平井裸眼砾石充填防砂工艺研究与应用
14.
Field Application of Sand Control Technology in Open Hole Horizontal Wells
孤岛油田水平井裸眼防砂技术的矿场应用
15.
Study on the Model of Stress under Refracture Around the Well of Sandstone Reservoir
砂岩储层重复压裂前井眼围岩地应力模型研究
16.
Horizontal Well Open Hole Gravel Packing Sand Control Completion Technique Used in Zhaodong Block,Dagang Offshore
大港滩海赵东区块水平井裸眼砾石充填防砂完井技术
17.
The service Department of Nitro Nobel AB has developed a drilling method which can also be used in sandpits to eliminate overhang.
诺贝尔炸药公司业务部研究成功一种打眼方法,可以用来排除采砂场中的突出部分。
18.
cord, foundry, used in the reparation of sand moulds
翻砂型芯,用于制备砂型