1.
The check of the belt strength and strain is bosed upon that tension and strain.
胶带强度和应变的校核均应以该处胶带断面的张力和应变为依据。
2.
Test method for electric strength of insulating adhesive tape at power frequency
GB/T7752-1987绝缘胶粘带工频击穿强度试验方法
3.
Test method for unwinding force of pressure sensitive adhesive tapes at low speed
GB/T4850-1984压敏胶粘带低速解卷强度测试方法
4.
On fatigue strength test rig for rubber belt joint
橡胶带接头疲劳强度测试实验台的研究
5.
Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)
GB/T7754-1987压敏胶粘带剪切强度试验方法(胶面对背面)
6.
This extra strong glue should do the job nicely.
这种超强度胶应该管用.
7.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
8.
Plywood--Determination of glue bond strength
GB/T9846.12-1988胶合板胶合强度的测定
9.
testing methods of wet gel strength for compounded latex
合成胶乳的湿润胶凝强度试验方法
10.
The tape composed of Kraft paper and embossed pve film, and is also characterized by good tensile strength, easy tear etc. Suitable for sealing on special purpose.
以牛皮纸为基材的牛皮纸包装胶粘带具有拉伸强度大，易撕断等特点，适用于特殊的封箱用途。
11.
Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method
GB/T7122-1996高强度胶粘剂剥离强度的测定浮辊法
12.
RubBerised textile adhesive tape of a width not exceeding 20 cm
用橡胶处理的宽度不超过20厘米的胶粘带
13.
Study on the influencing factors of gel breaking strength of amidated low ester pectin
酰胺化低酯果胶凝胶破碎强度的影响因素
14.
A Study on the Strength of the Trapezoid Teeth of Synchronous Belts,
梯形齿同步带带齿强度的理论研究
15.
Carefully choices should be made in respect to types, specifications and number of layers based on operation conditions. Strength safely coefficients must meet with the requirement listed in table below.
根据实际情况仔细选择合适的型号、规格和胶布层数的输送胶带。其强度安全系数要符合下表规定。
16.
TERAOKA's Packing Tapes exhibit highly effective adhesion.
TERAOKA包装用胶带具有高度有效的粘着力。
17.
Analysis of Transient Temperature Field on the Steel-cord-belt and Hot Plate
钢丝帘线胶带和热板瞬态温度场分析
18.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响