1.
Forming Technique Studies and Experimenta Verification for Sway Oil Pump Stator;
转向油泵定子成形工艺研究及实验验证
2.
A SIMPLIFIED CALCULATION METHOD FOR FIXED VALUE OF P/M SWING ROTOR IN OIL PUMP
粉末冶金机油泵摆线转子定值简易计算法
3.
Fuel Pump Module Locknut
燃油泵模组锁定螺帽
4.
"A fuel pump delivers fuel from the tank to the carburetor. There are two general types of fuel pump, mechanical and electric. "
油泵把油箱中的燃油抽出送到化油器中。通用的油泵有两种:机械泵和电子泵。
5.
Optimized Matching and R&D for Rotor-structure Fuel Delivery Pump
转子燃油输油泵优化匹配与研制开发
6.
Engine oil-Determination of borderline pumping temperature
GB/T9171-1988发动机油边界泵送温度测定法
7.
Position locknut over top of fuel pump module.
将锁定螺帽放在燃油泵模组上。
8.
Determination of the Growd Driving Auger Stem Pump Working System
地面驱动采油螺杆泵工作制度的确定
9.
FEM ANALYSIS OF SUCKER-ROD PUMPING SYSTEM FOR DIRECTIONAL WELL
定向井有杆泵抽油系统的有限元分析
10.
QUANTITATIVE ANALYSIS OF DYNAMOMETER CARDS FOR SUCKER ROD PUMPING WELLS
有杆抽油井泵示功图的定量分析方法
11.
Flowrate Mensuration of Centrifugal Pump in Practical Production
离心泵流量在油田生产实际中的确定
12.
Optimized Design of the Electric Fuel Pump s Rotors for EFP431 Type;
EFP431型电动燃油泵转子的优化设计
13.
Research of Single Chip Computer Controlling the Electronic-Controlled Fuel Injection Pump Test Stand;
单片机控制电子喷油泵试验台的研究
14.
Fault Diagnosis of a Feed-pump in Dushanzi Oil Refinery;
关于独山子炼油厂进料泵的故障诊断
15.
Analysis of Oil Pump Rotor Based on Pro/E and ANSYS
基于Pro/E和ANSYS的油泵转子分析
16.
fuel oil priming pump
起动充油泵、起动燃油泵
17.
fuel-oil transfer pump
燃油输送泵，输油泵
18.
Study on the Matching and Calibration of VP37 Electronic Controlled Distributor Fuel-Injection Pump and CA498ZL Diesel Engine;
VP37电控燃油分配泵与CA498ZL柴油机的匹配标定研究