1.
Research on the Deep Micro Holes Machining by EDM with USM in Inverted Layout
倒置式电火花超声复合加工深微孔的研究
2.
Study on Micro Hole Drilling with High Aspect Ratio by Micro EDM
大深径比微细孔电火花加工技术研究
3.
Rapid EDM systems for micro and small holes with high-aspect-ratio
大深径比微小孔快速电火花加工系统
4.
ENGINEERING PRACTICE AND NUMERICAL SIMULATION ON THE MILLISECOND BLASTING FOR DITCHING DEEP BORE HOLES
沟槽深孔微差爆破的工程实践和数值模拟
5.
INVESTIGATION OF THE REASONABLE TIME INTERVAL FOR LONG HOLE MILLISECOND BLASTING OF TUNG ANSHAN IRON MINE
东鞍山铁矿深孔爆破合理微差间隔时间的研究
6.
Research on Deep Small Hole Machining Based on Analysis of Flow Field
基于流场分析的微细电火花深小孔加工的研究
7.
Research development and analysis of the key technologies of micro deep holes machining
微细深孔加工研究进展及关键技术分析
8.
INFLUENCE OF DEEP-HOLE CONTROLLED PRE-CRACKING EXPLOSION ON MICROSTRUCTURE OF COAL
深孔控制预裂爆破对煤体微观结构的影响
9.
Applying of Ultrasonic Vibration Drilling on Micro and Small Hole Machining
振动钻削技术在深小微孔加工中的应用
10.
A Pilot Research on the Detection of Deep-fungi by Liquid Phase Hybridizations for PCR-ELISA;
PCR-微孔板液相杂交检测深部致病真菌实验性研究
11.
Study on the Technology of Inner Surface Inspection for Curved Micro-Pipe Based on Digital Image Processing;
基于图像的曲线型微细深孔及管路的内轮廓三维检测技术研究
12.
Application of deep-hole differential crush blasting in excavating the spillway of Kesem Reservoir
深孔微差挤压爆破在Kesem大坝溢洪道开挖中的应用
13.
Fabricating Electrode by Electrodepositing Technology and Its Application in Micro-EDM Deep Hole Drilling
电极的电沉积制备技术及其在微细电火花深孔加工中的应用
14.
A Kind of Approximate Arithmetic for Micro-perforated Panel Absorber with Variational Cavity
单层变腔深微穿孔板吸声体的一种理论近似算法
15.
Drilling 50 yards deep,
钻孔至50码深处，
16.
Her nostrils were slightly dilated.
她的鼻孔微微张着。
17.
CONDUCTING THE GROUTING DEPTH MONITORING FOR THE ANCHORAGE ROOT IN THE HOLE OF THE PRE -STRESSED ANCHORAGE ROPE UTILIZING MICRO-ELECTRODE SYSTEM APPARENT RESISTANCE POTENTIAL METHOD
利用微电极系视电阻率电位法进行预应力锚索孔锚根注浆深度监控
18.
guide twist drill
有导径的深孔麻花钻