1.
Discussion on Earthing Modes of Disconnectors with Earthing Switch Blades used for Subway
地铁带接地刀闸隔离开关接地方式的探讨
2.
Calculation and Analysis of Disconnecting 500 kV 3/2 Connection Earthing Knife-switch
500kV3/2接线刀闸解环的计算分析
3.
After the circuit is well connected, you pull down the brake shoe and then the electric lamp will be turned on.
电路连接好后, 把闸刀放下来电灯就能亮了。
4.
The improvement for the type of GW4-40.5DW isolating switch
GW4-40.5DW型隔离刀闸改造
5.
Analysis and Treatment of Generation Unit Trip Due to DC System Ground Fault
直流接地引起机组跳闸事故的分析与处理
6.
Analysis 6kV Switch Tripping Incident During Process of Search DC Grounding
6kV开关在查找直流接地过程中跳闸事件分析
7.
An analysis of the isolating switch operation leading to switch trip
一起刀闸操作引起开关跳闸事故的分析
8.
Thicker knife. Our valves have thicker, stronger knives, to prevent deflection under heavy pressure and to ensure a tight seal.
更厚的闸刀。我们的阀门具有更厚、坚固的闸刀，能够避免闸刀在高压下产生偏转，确保紧密密封。
9.
Do not access to blade edge and grip area.
请勿接近刀锋和握把的地方
10.
Abnormality Analysis and Improvement of Scissor-type Isolation Switch in Double-bus-switching Operation
双母线倒闸操作中剪刀式隔离刀闸的异常分析及改进
11.
Analysis of pivot bolt breaking for water gate of Xinqiao ship lock
新桥船闸闸门支铰连接螺栓断裂分析
12.
An instrument, such as a paper cutter, similar in action to a guillotine.
闸刀一种类似断头台的工具，如剪纸机
13.
Analysis of 220 kV Switch Post Insulator Breakdown Accident
220kV闸刀支柱绝缘子断裂原因分析
14.
Causes Analysis of Trip of 330 kV Line Due to Single Phase Ground Fault and 300 MW Set Trip
330 kV线路单相接地故障和300 MW机组跳闸原因分析
15.
Analysis and Treatment of Circuit Breaker Incorrect Trip Caused by DC Grounding of Substation
变电站直流接地引起断路器误跳闸事故分析及处理
16.
residential gateway
家用网关,[港]家居闸接器
17.
The wearing intensitivity of the high speed milling tools can be measured indirectly by means of measuring the thermo- voltage between the tools and the workpiece.
铣刀刀刃的磨损量可以通过铣刀与工具之间的温差电压间接地进行测量。
18.
Install the screws to attach the liftgate trim panel to the liftgate.
安装连接升降闸门饰板到升降闸门的螺丝。