1.
The Mathematic Model of Workpiece Deformation Region of Cross Wedge Rolling
楔横轧轧件变形区几何形状的数学模型
2.
Research on material flow trait during cross wedge rolling process
楔横轧变形过程中轧件内部金属流动的规律
3.
Analysis of Crack Healing in Hot Rolled Deformed Piece
热轧变形轧件内部裂纹愈合实验研究和机理分析
4.
Plastic deformation heat and friction heat are the two principle factors which caused the temperature rise of cold rolled thin plate.
冷轧时轧件塑性变形热和摩擦热是导致轧件温度升高的两个主要原因。
5.
On Deformation Laws and CAPP System for Radial-axial Ring Rolling;
环件径轴向轧制变形规律与CAPP系统研究
6.
Research on Microstructure of Hollow Part During Hot Deformation by 3-roll Cross Wedge Rolling
三辊楔横轧空心件热变形时微观组织的研究
7.
The variation of ring shape in cold rolling pro ce ss was analysed and the geometrical model of ring profile was developed.
分析了环件冷轧中的几何形状变化规律,提出了冷轧中环件轮廓形状的几何模型。
8.
3D FEM Analysis for Ring Rolling Process of Difficult-to-deformation;
难变形材料环件轧制过程的三维有限元数值模拟
9.
Influence of Cold Rolling Process on Plastic Strain Ratio of 1100 Aluminum Alloy Plates and Earring Ratio of Cup-shaped Parts
冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响
10.
⑤roll deformation is increasing linearly when rolling force is increasing. If the rolling force is equal, the roll deformation is invariant.
⑤随着轧制力增加 ,轧辊变形量线性增加·只要轧制力相等 ,轧辊变形基本不变
11.
Study on prediction of strip profile and strip edge drop of a Sendzimir mill
森吉米尔轧机轧件板形与边部减薄预报研究
12.
Fem Study on Metal Deformation Law of Hot Strip Rough Rolling;
热轧粗轧过程金属变形规律的有限元模拟研究
13.
Research on Thermal Deformation Behavior of Work Roll in Finishing Trains of Hot Strip Mill
热轧带钢精轧机工作辊热变形行为的研究
14.
Research on the Discrete Analytic Algorithm of Roll Deformation in the Hot Strip Rolling
基于微单元离散方法的热连轧轧辊变形研究
15.
Study and Application of the Edge Rolling Process in Hot Rolling
热带钢粗轧立辊调宽轧制过程变形研究及应用
16.
Deformation microstructure and characteristics of cast-rolling and normal rolling AZ31 magnesium alloy sheets
AZ31镁合金铸轧和常规轧制板的变形组织及形变特征
17.
Research on Rolling Technology of Conical Ring with Inner Steps and Ring Rolling Mill;
内台阶锥形环件轧制工艺与设备研究
18.
Software Development for Predicting Strip Profile and Strip Edge Drop of a 20-high Mill
20辊轧机轧件截面形状与边部减薄预报软件开发