1.
Study on Rim Indenting Puncher Based on Reconfiguration;
基于可重构的轮辋压窝冲孔机的研究
2.
The Application of FANUC OI Mate-MC System in Bus Bar Punching Machine
FANUC 0I Mate-MC系统在母排冲孔机上的应用
3.
Design and Realization of Double-headed Perforator’s Control System Based on PLC
双头冲孔机PLC控制系统的设计与实现
4.
Hole-punching machines, spotwelding machines, and assembly machines also use point-to-point NC systems.
冲孔机、点焊机及装配机也采用点位数控系统。
5.
Analysis of Metal Flow and Die Stress for Eyelet Machine of Seamless Steel Pipe;
无缝钢管管坯冲孔机金属变形及模具受力分析
6.
Research and Development of NC Programming and NC Control System of Hydraulic Punching Machine;
液压冲孔机的数控及图形编程系统的研究与开发
7.
Weld identification single hole punch.
鉴别焊缝的单孔冲压机
8.
Design of an Automatic Dividing Punch Mould for Spokes on Wheel Cranes
轮式起重机轮辐自动分度冲孔模设计
9.
Mechanism of Small Hole Punching on Thick Blank and Study on Die Life-span;
厚钢板小孔冲裁机理及模具失效研究
10.
Construction Technology of Mechanical Impact Pore-forming in the Project of Pouring Pile Foundation
灌注桩基工程机械冲击成孔施工工艺
11.
Microscopic mechanism of void coalescence under shock loading
冲击加载下孔洞贯通的微观机理研究
12.
Application and Prospect of Impacting Drillerin Pile Foundation Engineering
桩基工程中冲孔打桩机的应用及展望
13.
Investigation on Noise Elimination Nozzle with Micro-Perforated Panel in Pulse Detonation Engine
脉冲爆震发动机微穿孔消声喷管研究
14.
stagger cut press
对板料作曲折送进以连续落料冲孔的压力机
15.
Experimental Study of No-Tillage Push-pull Punching Planter;
免耕覆盖往复冲孔式播种机的试验研究
16.
The Pore-forming Mechanism Study of Cam Bit on Percussive-Rotary Extruding DTH Drilling
凸轮型冲击回转挤压钻头成孔机理的研究
17.
Micro-Analysis of the Void Growth of Aluminum under Shock Loading
冲击加载下铝中孔洞长大的微观机理分析
18.
Both single and double screen deck, stainless slot deck and woven wire cloth are available, the sieve size should be dpecified.
系列筛机分单层、层筛面，筛孔有冲孔编织，特殊需要可商定，并提出筛孔尺寸。