1.
Analysis on Mechanism of Cleavage Fracture in a Low Alloyed Steel at Different Low Temperature
低合金钢在不同低温下解理断裂机理的研究
2.
The fracture mode changed from quasi-cleavage plus cleavage obtaioed from conventional treatment to quasi-cleavage plus dimple.
微观断口由常规工艺的准解理加解理断裂变为准解理加韧?断裂。
3.
Fracture measurements show that the mode attributed to cleavage fracture.
断口实验结果表明,接头断裂模式为解理断裂。
4.
The tesile fracture is mixture of quasicleavage and touph dimple.
拉伸断口为韧窝和准解理混合断裂。
5.
Survey on Breaking Mechanism of Dual Mill With Old Marks;
二辊轧机“老印”断辊的断裂机理研究
6.
Researches on Fracture and Fracture Mechanism of a New Type Wood-Plastic Composite;
新型木塑复合材料断裂及断裂机理的研究
7.
Study on Mechanism and Criterion for Brittle/Ductile Fracture and Theory of Crack-tip Deformation;
脆性/韧性断裂机理与判据及裂尖变形理论研究
8.
That means PMMA has changed from polar polymer to non-polar polymer.
对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设。
9.
The steel trea-ted with this pruccss shows a fractograph with quasi-cleavage and dimple。
钢的断口为准解理十韧窝属于韧性断裂。
10.
The fracture of composites assumes toughness dimple.
复合材料的拉伸断口为解理与韧窝混合断裂.
11.
The alloys occur ductile fracture after annealing.
合金热轧态呈脆性准解理断裂,退火后转变为韧性断裂。
12.
Program of Deal with the Accidend of Compound Heat Drum Rupture;
复合式转筒烘干机断裂事故处理方案
13.
Bending Fracture Mechanisms of a 980MPa High Strength Steel
一种新型980MPa高强钢的弯曲断裂机理
14.
Microstructure and fracture mechanism of 1000 MPa hot dip galvanized dual phase steel
1000MPa热镀锌双相钢组织和断裂机理
15.
Rupture Mechanism and Technology Analysis on Horizontal Casting 12Cr1MoVG Round Billets
12Cr1MoVG水平连铸坯断裂机理及工艺分析
16.
Fracture analysis and treatment for 2nd blade of high-pressure rotor in Russia-made 800 MW turbine unit
俄制800MW机组高压叶片断裂分析与处理
17.
Investigation of Fracture Mechanism of 6061 Aluminum Alloy by Means of In-situ Observation
6061铝合金断裂机理的原位拉伸研究
18.
The cutting tool was characterized by intercrystalline fracture attributed to fatigue and partial cleavage fracture in the machining process.
聚晶金刚石刀具在加工过程中的磨损机理主要表现为具有疲劳磨损特征的沿晶断裂及局部解理断裂.