1.
Research on Improving the Hardness and the Abrasion Resistance of YT5 Cemented Carbide with Nickel Binder as Cutting Tools;
提高Ni代Co YT5硬质合金切削刀具材料硬度与耐磨性的研究
2.
Investigation on Hardness of Metal Matrix to Composite-alloy Grinding Roller of Wearing Resistance;
基体金属硬度与工艺对复合辊套耐磨性的研究
3.
Microstructure and Wear Resistance of NR400 High Strength Bainite Wear-resistant Steel Plate
NR400高强度贝氏体耐磨钢板的组织与耐磨性能
4.
The Development of Metal Powder-cored Wire for Submerged Overlaying with High Hardness and Toughness;
高硬度高韧性耐磨埋弧堆焊用药芯焊丝的研制
5.
An in Vitro Investigation of Wear Resistance and Hardness of New Composite Resins;
新型复合树脂耐磨性及硬度的体外研究
6.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
7.
"To some extent, the hardness of a material is indicative of its resistance to abrasion and wear characteristics. Nickel plating is widely specified as a disc coating for butterfly valves."
另外,这种材料的硬度象征着它的耐磨性与抗老化性。镍电镀主要用在蝶阀的蝶板电镀上。
8.
Production choosing β titanium alloy after heat treatment could increase the high temperature intensity and wear off with hardness of HRC42.
选择β钛合金材质生产，经热处理后增加高温强度及耐磨性，硬度HRC42。
9.
Application of argon arc local strengthen can increas e hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
10.
CONTAINING TI AND B HARD--FACING EELECLRDE RESEARCH ANALYSIS FOR THE HARDNESS WEAR-RESISTING ANTI-ARAC PROPERTY
含钛硼堆焊焊条研究——堆焊金属的抗裂、硬度、耐磨性分析
11.
The Experimental Study on PMMA Artificial Tooth to Improve the Hardness and Antiwear with Nanotechnology;
纳米技术提高聚甲基丙烯酸甲酯人造牙硬度及耐磨性的实验研究
12.
Development of CO_2 Gas Shielding Flux Core Wire with High Hardness and Research on Wear Resistant Property
高硬度CO_2气保护堆焊药芯焊丝的研制及其耐磨性能研究
13.
Influence of Duty Cycle of Periodic Alternating Magnetic Field on Microstructure and Wear Resistance of Plasma Arc Surfacing Welding Layer on Fe-Based Metals
脉冲磁场占空比对铁基金属组织硬度及耐磨性的影响
14.
Study on Wear Resistance Behaviors of Hardening Coatings Sprayed on Corrugating Rolls Surface
瓦楞辊表面喷涂硬质涂层耐磨性研究
15.
Sub-micron grades with extremely high wear resistance for abrasive materials such as laminated chip board, hard wood, etc.
是适合于研磨料（比如电木板、硬木）的加工，具有极高的耐磨性，晶粒度为亚微米级的牌号。
16.
The result showed the main influences of resistance wear of nozzle were materials and surface hardness as well as abrasive water-jet processing parameters.
结果表明,影响其耐磨性主要因素是喷嘴材料、面硬度及高压磨料水工艺参数。
17.
Strength and abrasion resistance of pavement manufactured sand cement concrete
路面机制砂水泥混凝土的强度与耐磨性研究
18.
Production of Low-Cr Hi-Hardness Wear Resistant White Cast Iron with Rare Earth Modification
用稀土变质低铬白口铸铁生产高硬度耐磨铸件