1.
Influence of Copper on Abrasion Resistance of Wear-Resisting Casting Steel for Mines
铜对矿山用耐磨铸钢抗腐蚀磨损性能的影响
2.
Corrosion and Corrosion-wear Behavior of Modified Layers on Titanium and Its Alloy;
钛及钛合金表面改性层腐蚀及腐蚀磨损性能的研究
3.
Effect of Shot Blasting on Corrosion and Corrosive Wear Property of Magnesium and Its Alloy;
喷丸处理对镁及镁合金腐蚀磨损性能的影响
4.
Effect of Cr Content on Impact Corrosion and Abrasion Properties and Mechanisms of Low Carbon Alloy Steel;
铬含量对低碳合金钢冲击腐蚀磨损性能和机理影响的研究
5.
Effect of Surface Treatment on the Fretting Wear Behavior of Medical Grade Austenitic Stainless Steels
碳化、氮化与碳氮化对316LVM不锈钢微动腐蚀磨损性能的影响
6.
Investigation on corrosive wear property of nano-Al_2O_3 particles reinforced Ni-based alloying layer
纳米Al_2O_3颗粒增强Ni基复合镀渗合金层的腐蚀磨损性能研究
7.
Effect of Mediator and Impact Energy on the Impact Corrosion Abrasion Properties of New Wet Grinding Liner;
新型矿山湿磨机衬板钢在不同介质和冲击功下的冲击腐蚀磨损性能
8.
Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;
新型奥氏体不锈钢磨损、腐蚀性能研究
9.
Wear and corrosion properties of 45 steel boronised using Nd_2O_3 as activator
稀土粉末渗硼45钢的磨损与腐蚀性能
10.
Experimental Study of Stainless Steel Cladding Layer Corrosion Resistance and Wear Resistance
不锈钢堆焊层抗磨损腐蚀性能的实验研究
11.
Results indicated that wear resistance and corrosion resistance of black TiN coating were higher than that of black oxide film or phosphatizing films.
结果表明，其耐磨损、耐腐蚀性能均高于氧化和磷化黑色膜层。
12.
Effect of Composition on Impact-wear Behavior and Mechanism of Alloy Liner Steels in Corrosive Condition;
成分对合金衬板钢材料腐蚀条件下冲击磨损性能与机理的影响
13.
Study on the Structure and Corrosive-Wear Behavior of Mo-N Diffusion Layers on T16a14V Alloy with Double Glow Plasma Surface Alloying Technique;
Ti6A14V合金双辉离子Mo-N共渗组织结构及腐蚀-磨损性能研究
14.
Research on Structure Property and Corrosive Wear Mechenism of Co-Base Dip-Roll Bushing in Hot-Dip Galvanizing;
钴基沉没辊轴套材料组织性能与腐蚀磨损机理的研究
15.
Frictional Wear Resistance and Corrosion Resistance of Ag/Ti-6Al-4V Alloy System Treated by Plasma Immersion Ion Implantation Technique (PIII)
TC4合金表面全方位离子注入Ag的耐摩擦磨损和抗腐蚀性能
16.
Tribological Behavior of Fibers-reinforced PTFE Composites in Acid Solution
腐蚀环境中纤维增强聚四氟乙烯复合材料的摩擦磨损性能研究
17.
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
18.
The Design and Inventing of the Versatile High Temperature Corrosive Wearing Test Machine;
多功能高温金属磨损腐蚀试验机的研制