1.
Effect of Billet Withdrawal Speed on Molten Steel Flow and Temperature Distribution in Crystallizer
拉坯速度对结晶器内钢液流动和温度分布的影响
2.
At the same casting speed, the eddy center is the lowest if the pouring angle is about 60° and the penetrating depth of molten steel flow increases with the increasing pouring angle.
在相同的拉坯速度下，随着浇注倾角的增大，钢液流股的穿透深度也随之增大。
3.
Increasing Casting Speed Experiment in a Φ150 mm Round Bloom Continuous Caster
Φ150mm圆坯连铸机提拉速工业试验
4.
Study on the Mathematical Model of Solidification Thermal Transmission in the Process of Continuous Casting Slab with Speed Changing;
连铸板坯变拉速过程凝固传热数学模型研究
5.
Numerical Simulation of Thermal Behavior of Copper Plates for Slab Continuous Casting Mold with High Casting Speed
高拉速板坯连铸结晶器铜板热行为数值模拟
6.
Study for Effect Factors of Surface Wave of Molten Steel in Mold for High Speed Slab Casting
高拉速板坯连铸结晶器液面波动影响因素研究
7.
ANALYSIS OF LIQUID FLUX CONSUMPTION MECHANISM FOR SLAB CONTINUOUS CASTING MOLD WITH HIGH CASTING SPEED
高拉速板坯连铸结晶器液态渣消耗机理分析
8.
Influence of Increasing Casting Speed of Hypoperitectic Steel Slab on Heat Transfer of Mold
提高亚包晶钢板坯拉速对结晶器传热的影响
9.
STUDY ON MICROSTRUCTURES AND PROPERTIES OF VITREOUS TILES AFFECTED BY DIFFERENT COOLING RATES
冷却速度对砖坯显微结构及性能影响的研究
10.
Effect of Continuous Casting Mold Oscillation Parameters on Slab Surface Cracks Formation Under High Casting Speed
高拉速连铸结晶器振动参数对板坯表面裂纹形成的影响
11.
Study on Optimization of Mold Powder for Medium Carbon Steel Slab Casting and Plant Trial With Optimized Flux for Increasing Casting Speed
中碳钢板坯保护渣性能优化及提高拉速工业试验研究
12.
The sizes of slabs, the casting speeds of CCM and the cooling methods in second cooling zone are key factors which affecting the temperature of slabs out of CCM.
影响铸坯出连铸机温度的主要因素是铸坯尺寸、连铸机拉迪和冷却制度。
13.
Calculation and practice of thermal unbending pressures for big round bloom casters
大圆坯拉矫机热坯压力的计算与实践
14.
The initial shrinkage temperature and the shrinkage change little with the increase of heating rate.
升温速率增大,坯片开始收缩的温度及收缩率几乎不变。
15.
FEM Modelling of the Temperature Field and Stress Field of Mould Wall in High Speed Casting of Steel Billet
小方坯高速连铸结晶器温度场和应力场的有限元模拟
16.
Effect of cooling rate on the slab surface microstructure of microalloyed steel containing Nb and Ti
冷却速度对含铌、钛微合金钢铸坯表层组织结构的影响
17.
Effects of extrusion speed and billets of electromagnetic casting on microstructure and mechanical properties of AZ31 magnesium alloy sheet
挤压速度和电磁铸造锭坯对AZ31镁合金板材组织和性能影响
18.
salad bowl of porcelain or china
瓷或白坯瓷制沙拉碗