1.
The clamps should be stable, the clamping force should be in normal direction to the support surface.
5夹紧器要稳定可靠，夹紧方向按定位面法线方向。
2.
Processing Technology of Clamp Holder of Clamper of Protective Cap of Oil Tank and Clamp Design
油桶保安盖锁紧器夹紧块的加工及夹具的设计
3.
The circle indicates the squeezing of its robotic grip; as the force of the grip increases, the circle widens.
圆周表示机器人的手钳夹紧；夹力增加，圆圈扩大。
4.
the Application of Accumulator in Hydraulic Pressure Clamping System;
蓄能器在机床液压夹紧系统中的应用
5.
Pressure Setting of Press-keeping Clamping Circuit Based on Accumulator
基于蓄能器保压夹紧回路的压力设定
6.
Study on Controlling Method of Metal Belt Continuously Variable Transmission (CVT) in Clamping Force Aiming Slip Rate;
汽车无级变速器滑转率与夹紧力控制研究
7.
Study of Clamping Force Control Strategy for CVT
金属带式无级变速器夹紧力控制策略的研究
8.
Study on the positioning and clamping of tractor transmission box on assembly line
拖拉机变速器装配线上箱体的定位夹紧研究
9.
Study of Super Hydrostatic Test of Integrated Multi-layer Clamping High Pressure Vessel
整体多层夹紧式高压容器超水压试验研究
10.
steering gear column clamp
转向齿轮柱夹紧夹子
11.
clamp, work-holding, for machine tools
机床工件夹紧用夹具
12.
work-holding jig, for machine tools
工具机工件夹紧用夹具
13.
A secure grip or hold applied by a tool or machine upon a working surface.
固定器在工作面上使用工具或机器的夹紧或固定装置
14.
Pry back three clips retaining air cleaner cover to air cleaner housing.
撬起三个紧固空气清洁器盖至清洁器壳体的夹环。
15.
The trap had cut deeply into the rabbit's flesh.
捕兽夹子紧紧夹住兔子的皮肉.
16.
Press the buttons and retract the clamping cylinder for clamping ring on quick release coupling on carrier center section.
"按下按钮并缩回起重车中段速脱离合器上压圈上的夹紧缸?????"
17.
The Optimizing Clamping Force Control for Metal Pushing V-belt Continuously Variable Transmission Based on the Slipping;
基于滑移的金属带式无级变速器最佳夹紧力的控制研究
18.
Stress Analysis and Pressure Confirmation of Super Hydrostatic Test of Integrated Multi-layer Clamping High Pressure Vessel
整体多层夹紧式高压容器超压试验的应力分析及压力确定