1.
Adjusting of properties of low molecular polyamide hot melt adhesive
低分子聚酰胺热熔粘合剂的性能调节
2.
Synthesis of Polyester Hot-Melt Adhesive for Aluminium Foils Packaging for Medicine
药品包装铝箱用聚酯热熔粘合剂的合成
3.
heat weld non-woven fabric
热[熔]粘[合]非织造布
4.
Hot-melt adhesives--Determination of thermal stability
GB/T16998-1997热熔胶粘剂热稳定性测定
5.
paving block of fused slag without a binder (excl. heat-insulating blocks)
铺设用砌块，无粘合剂的熔凝矿渣制的（不包括隔热砌块）
6.
foam flame bonding
泡沫塑料热熔粘合（利用火焰）
7.
Determination of the softening point of hot-melt adhesives Ball and ring method
GB/T15332-1994热熔胶粘剂软化点的测定环球法
8.
heat-or sound-insulating board of vegetable materials agglomerated with mineral binders
隔热或隔音板，用矿物粘合剂粘结的植物材料制
9.
Spinning Technology of Durable Water-Repellent PP/PE Heat-Adhesive Core-Sheath Composite Fiber and Study on Its Behavior;
耐久型拒水PP/PE低熔点热粘合复合纤维的制备及性能研究
10.
The board and chip are then heated to melt the solder and join the two together.
然后加热面板和芯片的缝合处，使焊锡熔化，从而把二者粘在一起。
11.
Enamelled round winding wires-Part 8: Heat or solvent bonding polyester enamelled round copper wires
GB/T6109.8-1989漆包圆绕组线第八部分:热粘合或溶剂粘合聚酯漆包圆铜线
12.
The bonding agent may be incorporated in the suspension either through the use of thermosensitive fibers or as an adhesive of some type.
可以使用热敏性纤维,也可以加入多种粘合剂进行纤维的粘合。
13.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
14.
Studies on the Preparation of Water-based Adhesives in Photothermographic Material;
光敏热显影材料水基粘合剂的制备研究
15.
Study progress of thermal degradation of acrylic binders for ceramics
丙烯酸系陶瓷粘合剂热降解的研究进展
16.
A Composite Thermal Conductive Insulating Epoxy Adhesive Material for Electronic Package
电子封装用复合导热绝缘环氧胶粘剂的研制
17.
Investigation on nanosized fuse-promoting adhesives of super low temperature ceramics glaze
陶瓷超低温釉纳米助熔粘接剂的研究
18.
The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.
醋酸乙烯酯共聚物用途广泛,可用炸弹性体、膜、沫、料、熔胶、性粘合剂、织上浆剂、物涂层等。