1.
Study on Removing Organic Template from SBA-15 by HNO_3 Oxidation Treatment
HNO_3氧化脱除SBA-15中有机模板剂的研究
2.
Organotemplate-Free Routes for Synthesizing Zeolites
无有机模板剂条件下合成沸石催化材料
3.
Synthesis and Characteristics of Mesoporous Ceric Oxide Using An Inorganic Template Approach
无机盐模板剂法合成介孔CeO_2
4.
Synthesis, Crystal Structure and Characterization of the Metallo-organically Templated Borate;
以过渡金属配合物为模板剂的无机—有机杂化硼酸盐的合成、结构及表征
5.
Organotemplate-free Synthesis of ZSM-34 Zeolite and Its Analogue Containing Framework Heteroatoms in the Presence of Zeolite L Seeds Solution
在L沸石胶态导向剂的作用下ZSM-34及其杂原子沸石的无有机模板合成
6.
Flatness Finite Element Simulation Analysis for the Five-stand Cold Tandem Rolling Mill;
五机架冷连轧机板形有限元模拟分析
7.
Study on the Encapsulation of Organic Light-emitting Diode Materials with AAO;
AAO模板封装有机电致发光材料的研究
8.
Simulation and Optimal Design for the Platens of an Injection Molding Machine
注塑机模板的有限元分析及优化设计
9.
Shape-controlled Synthesis of ZrO_2 Modulated by Organic Templates
有机模板调控氧化锆的形貌控制合成
10.
Preparation and Catalytic Properties of Some Functional Inorganic Compounds Using Poly(Amide Amine) Dendrimer as a Template;
以聚酰胺—胺为模板剂一些无机功能材料的制备及催化性能研究
11.
The Adsorption Mechanisms of Cadmium on Crosslinked Chitosan Templated Under Microwave Irradiation
微波模板交联壳聚糖吸附剂对镉离子的吸附机理
12.
Synthesis and Characterization of Ordered Porous Silica, Using New Surfactants as Templates;
以新型表面活性剂为模板，有序多孔氧化硅的制备及表征
13.
This paper details the influence of organosilicon waterproofing agent on the waterproof and mechanical properties of gypsum particleboard( GPB).
主要讨论了添加有机硅防水剂对石膏刨花板物理力学性能的影响。
14.
INFLUENCE OF AN ORGANIC AMINE ADDICTIVE ON CORROSION PERFORMANCE OF MOLYBDATE PASSIVE FILM FORMED ON HOT-DIPPING GALVANIZED STEEL
有机胺类添加剂对热浸镀锌板钼酸盐钝化膜耐蚀性能的影响
15.
The plexiglass product usually may divide into pours the board, squeezes out the board and the mold plastic.
有机玻璃产品通常可以分为浇注板、挤出板和模塑料。
16.
"There is no Certification Authority available for the selected Certificate Template.
"所选的证书模板没有可以使用的证书颁发机构。
17.
Influence of Organic Template on BaTiO_3 Crystallizing Habits in the Hydrothermal Method;
水热反应中有机物模板对BaTiO_3结晶形态的影响
18.
Finite Element Analysis and Topological Optimal Design for the Platens of Injection Molding Machine;
注塑机模板的有限元分析及拓扑优化设计