1.
Strain-Induced Precipitation in Nb and Nb-Ti Microalloyed Steel;
Nb钢及Nb-Ti钢的应变诱导析出行为
2.
Analysing the Effect of Nb and Ti in Low Grade Pipeline Steel Produced in Benxi Steel
浅析本钢X52管线钢Nb和Ti的作用
3.
Study on Effects of Cold Rolling-Process on Microstructure and Properties of Nb+Ti- Interstitial Free Steel;
Nb+Ti-IF钢薄板冷轧工艺及组织性能研究
4.
The Study of Surface Modification by Ti/Nb Ion Implantation into Mould Steels;
Ti、Nb离子注入工模具钢表面改性研究
5.
Mechanical Properties and Texture Characteristic of IF Steel Containing Nb and Ti by Secondary Cold Rolling
Nb+Ti-IF钢二次冷轧性能和织构特征
6.
Continuous cooling transformation behavior of low-carbon Mn-Cu-Ti-Nb steel
Mn-Cu-Ti-Nb低碳钢连续冷却转变行为
7.
Study on Microstructures and Properties of Ultra Low-carbon Nb+Ti-IF Steel
超低碳Ti+Nb-IF钢组织与性能的研究
8.
Effect of Annealing Temperature on Texture of Nb+Ti Stabilized Ferritic Stainless Steel
退火温度对Nb+Ti双稳铁素体不锈钢织构的影响
9.
Microstructure and Mechanical Properties of Micro-Alloy Steels Alloying with V,Nb,and Ti
含V,Nb,Ti微合金钢的微观结构及力学性能
10.
Dissolution Behavior of Nb,Ti Carbonitride Precipitates in Low Carbon Microalloyed Steel
低碳微合金钢中Nb、Ti碳氮化物的回溶行为研究
11.
Research on Microstructure and Properties of Ti+Nb Ultra-low Carbon Bake-hardening Steel
Ti+Nb超低碳烘烤硬化钢的组织和性能研究
12.
Continuous annealing of Ti and Ti+Nb bearing ultra-low carbon bake hardening steels
Ti和Ti+Nb处理的超低碳烘烤硬化钢连续退火研究
13.
Austenite Grain Coarsening during Reheating in a Nb-V-Ti Microalloyed Steel
Nb-V-Ti微合金钢再加热过程中的奥氏体晶粒粗化
14.
Effect of Ti-Nb on Formability of Annealed Cold Rolled Sheet of Ultra-Low Carbon Ferrite Stainless Steel Cr18
Ti-Nb对Cr18超低碳铁素体不锈钢冷轧板成形性能的影响
15.
Effect of Weld Thermal Cycle on Second Phase Particles in Ti-Nb Micro-alloyed Steel
焊接热循环对Ti-Nb微合金钢中第二相粒子的影响
16.
Influences of Ti、Nb on Recrystallization Texture of Cold Rolled Sheets of Ultra-Low Carbon Cr18 Stainless Steel
Ti、Nb对超低碳Cr18铁素体不锈钢冷轧板再结晶织构的影响
17.
Effect of Solution C on Bake Hardening Behavior of Nb-Ti Microalloying ULC-BH Steel Plate
固溶C对Nb-Ti微合金化ULC-BH钢板烘烤硬化性能的影响
18.
Study on Structure and Toughness in heat affected zone of Nb-Ti Microalloyed Steel after Welding with High Heat Input
Nb-Ti微合金钢大线能量焊接热影响区组织和韧性的研究