1.
Experiment Study on Extrusion Swell of PS/SCCO_2 Foaming System;
聚苯乙烯/超临界CO_2发泡体系挤出胀大实验研究
2.
Experimental Research and Forecasted System Development of Die Swell Ratio of Polymer;
聚合物挤出胀大的实验研究及预测系统开发
3.
Numerical Simulation and Experimental Study of Polymer Foaming and Extrudate Swell Process
聚合物发泡与挤出胀大过程数值模拟及实验研究
4.
The Relationship Between Extrudate Swell Ratio and the Length of Slip Part in Gas-Assisted Extrusion
气辅挤出胀大比与滑移段长度的关系
5.
Slip Length of Gas-Assisted Extrusion Die Influence on Die Swell Ratio
气辅挤出口模中滑移段长度对挤出胀大比的影响研究
6.
Phenomenological Studies on Extrusion Swell of Polymer Melt Through Conical Short Dies;
聚合物熔体在圆锥短口模的挤出胀大唯象研究
7.
The uniaxial elongational property and the extrusion swell through a long die for the IUPAC-LDPE melt
IUPAC-LDPE熔体的单轴拉伸特性和长口模挤出胀大
8.
Extruded swell behavior of polypropylene specialized for manufacture of meltblown nonwoven fabric
熔喷非织造布用聚丙烯材料的挤出胀大行为
9.
THE NFLUENCNG FACTORS RESEARCH OF DE SWELL RATO OF HDPE/OMMT NANO COMPOSTE
HDPE/OMMT纳米复合材料挤出胀大比的影响因素研究
10.
A universal device is designed for this study,with the device the forming of tee junction could be done.
设计了一套挤胀成形三通管接头的通用装置,并利用此装置进行了三通挤胀成形实验。
11.
Research in the Theory & Experiment of Plastic Bulging Forming and Finite Elementanalysis for T_Tube's Forming Bulging Process;
塑料挤胀成型过程的理论和实验研究及塑料三通挤胀成型过程的有限元分析
12.
In this paper,an experimental research on extrude-bulge forming of tee junction using plastic medium has been conducted.
此文对利用塑性介质挤胀成形三通管接头变形力进行了实验研究。
13.
Theoretical Analysis on Polymer Melt Extrusion Swell at Conical Die with Different Entrance Angles
不同角度圆锥口模对聚合物熔体挤出胀大的影响
14.
Theoretical Research on Mechanism of Extrudate Swell and Numeric Design of Die for Multi-Lumen Precise Medical Catheter;
多腔精密医用导管挤出胀大机理及机头数字化设计的理论研究
15.
Inverse Extrudate Swell for Multi-Lumen Precise Medical Catheter
挤出胀大逆向求解技术在多腔精密医用导管口模设计中的应用
16.
Processing Technology of Non-predrying PET by Tri-screw Extruder
无需预干燥的PET三螺杆挤出实验研究
17.
THEORETIAL PREDICT AND EXPERIMENTAL RESEARCH OF PRODUCT DIAMETER IN GAS-ASSISTED EXTRUSION
气辅挤出成型中挤出物直径的理论预测和实验研究
18.
STUDY ON PARISON SWELL OF MODIFIED PVA IN EXTRUSION BLOW MOLDING
改性聚乙烯醇挤出吹塑型坯膨胀研究