1.
Modal Analysis of a Biglide parallel Grinder for Helical Drill Point Machines System Based on ANSYS
基于ANSYS二并联螺旋面钻尖刃磨机床刚度分析
2.
bit cutting angle
钻冠的尖度，钻头磨角，钎子头刃角
3.
Repeating Sharpening of the Twist Drill and Computer Simulation;
麻花钻钻尖的重刃磨技术及计算机仿真
4.
ZZM-A drill grinder simple structure, easy operation. One setup to complete grindings on drill web and chisel edge.
a型钻头磨刀机结构简单，使用方便，一次装夹就可以完成钻头的钻尖和横刃的修磨。
5.
An implement with cutting edges or a pointed end for boring holes in hard materials, usually by a rotating abrasion or repeated blows;a bit.
钻带切割刃或尖端的工具，用于在坚硬材料上钻孔，一般靠旋转磨损或反复击打实现钻孔
6.
"drill:an implement with cutting edges or a pointed end for boring holes in hard materials, usually by a rotating abrasion or repeated blows; a bit."
"带切割刃或尖端的工具,用于在坚硬材料上钻孔,一般靠旋转磨损或反复击打实现钻孔."
7.
drill ,crown, not toothed, with an abrasive coated working edge
无齿顶钻,带涂有磨料的工作刃
8.
Application of Image Technology on Measuring Parameters of Multifacet Drill Point
基于图像技术的多刃钻尖参数的测量及应用
9.
The Teaching Methods of the Standard Fried Dough Twist Operation;
标准麻花钻头刃磨操作规范的教学方法
10.
Research on Grinding Method of Drilling Cutter's Flank
基于钻削刀具后刀面刃磨方程建立的研究
11.
To raise drilling performance of new micro-drill, a novel method was advanced for reginding of chisel edge.
为了提高新型微钻头的钻削性能,提出了一种适合于微钻头的横刃修磨原理及方法。
12.
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools
数控车削刀具的刃磨引起的刀尖半径补偿的误差分析
13.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下，刀尖圆弧圈度提高到0.2μ以内。
14.
The Research on Numerical Control System Based on PC and Vision Orientation of Drill in Drill Point Grinder;
基于PC的钻尖磨床数控系统及钻头视觉定位检测研究
15.
The weaker section of a sword blade, from the middle to the tip.
剑刃剑刃从中部到尖端的柔弱部分
16.
double taper bit
两层镶嵌刃取心钻头
17.
EDG Technology of PCD Tool with Internal Cutting Edges
内凹刃口PCD刀具电火花刃磨工艺
18.
bench universal tool cutter grinder
台式万能刀具刃磨床