1.
",When the up-down switch is pushed up to raise the seat, the motor starts to turn and, at the same time, the up-down solenoid is actuated to throw the up-down gears into mesh.. "
座椅升高时,推动升降开关,马达开始转动,同时升降电磁线圈起动并推动升降齿轮啮合
2.
Using a razor knife, slide the blade between the liftgate glass and the inboard edge of the reveal molding.
用剃刀，在升降开关玻璃和露着的嵌条内侧边缘间滑动刀锋。
3.
Liftglass Ajar Switch Remove/Install
升降窗开启开关拆卸/安装
4.
Liftgate Lock Cylinder Switch Remove/Install
升降闸门锁芯开关拆卸/安装
5.
The stem rises and lowers as the valve is opened and closed.
当阀门开启或关闭时，阀杆上升或下降。
6.
A Multi-Mode Four-Switch Buck-Boost DC/DC Converter
一种多模式四开关降压-升压型DC-DC转换器
7.
Open and support liftgate.
打开并支撑升降闸门。
8.
UPPER LIFTGATE OPENING TRIM
上部升降闸门开口装饰
9.
UPPER LIFTGATE OPENING TRIM PANEL
上部升降闸门开口饰板
10.
Step down the pedal switch(5),the corner can be cut then.
踩下脚踏开关(5)即可切角.锯片均速上升,锯截工件,松开锯片下降.
11.
a bridge that can be raised to block passage or to allow boats or ships to pass beneath it.
是一种可开闭的吊桥，它通过自身的升降来关闭通路或打开通路使船只能从它下面过去。
12.
Install the liftgate opening upper trim.
安装升降闸门开口上部饰板。
13.
Position trim panel/cargo lamp at liftgate opening.
将装饰板/载货灯定位至升降闸门开口。
14.
Disconnect wire harnesses and washer hose from liftgate.
从升降闸门上断开线束和清洗器软管。
15.
a switch in the up position.
位于上升位置的开关
16.
Hatch covers handled with the aid of a lifting appliance shall befitted with readily access ible and suitable attachments for securing theslings or other lifting gear.
用起重设备开启或关闭的舱盖应装有易接触且合适的附属装置，供紧固吊链或其他升降装置。
17.
Install liftgate opening (headliner) upper trim molding.
安装升降闸门开口（车顶蓬内衬）上装饰嵌条。
18.
Remove liftgate opening (headliner) upper trim molding.
拆去升降闸门开口（车顶蓬内衬）上装饰嵌条。