1.
Install upper column shrouds.
安装上转向柱围板。
2.
Place ignition switch into openings on steering column.
放置点火开关至打开的转向柱上。
3.
During steering maneuvers, the strut and the steering knuckle (through the ball joint and a pivot bearing in the strut's upper retainer) turn as an assembly.
车辆转向时，支柱以及转向关节（经由球形接头与上支柱固定器之轮毂轴承）会一体旋转。
4.
DIRECT SELECT gearshift on steering column, with steering-wheel gearshift buttons
转向柱上的直接手动选档（DIRECT SELECT）换档系统（带有方向盘换档按钮）
5.
tube and ball type steering column
球轴承套管式转向管柱
6.
steering gear column clamp
转向齿轮柱夹紧夹子
7.
Hamilton standard motor
径向回转柱塞液压马达
8.
tilt and telescopic steering colum
倾斜和缩进式转向管柱
9.
Install column onto the mounting studs.
安装转向柱至装配螺椿。
10.
Column shaft coupler binding.
转向柱轴接合器过紧。
11.
Remove the steering knuckle from the strut.
自支柱拆除转向关节。
12.
Remove the mounting nut/washer assemblies and remove the column.
拆下转向柱装配螺母/垫圈总成，并拆下转向柱。
13.
Collision Analysis of Steering Column on C-EPS;
C型电动转向器转向柱碰撞机理研究
14.
Collision Analysis of Steering Column on EPS;
电动转向器中转向柱的碰撞性能分析
15.
"The gear sector, toothed roller, or stud meshes with the worm."
转向摇臂轴上装有扇形齿轮、带齿滚柱或指销,用以和蜗杆啮合。
16.
Position key cylinder into steering column as it would normally be in the ON position.
将钥匙柱放入转向柱中，其正常应该在ON（开启）位置。
17.
The Research of Fault Diagnostics for a Column-assist Type Electric Power Steering System (C-EPS);
转向柱式电动助力转向器故障诊断研究
18.
Remove tilt lever (if equipped) from column.
从转向柱拆除倾斜杆（如果装备）。