1.
Application of Microstructure Prediction Technology to Hot-Forming Process
微观组织预测技术在热成型过程中的应用
2.
Inversion of Thermal Contact Resistance in Injection Molding;
注塑成型过程中的接触热阻反演研究
3.
The Numerical Simulation of Microstructure Formation of Solidification in the Heated Mould Continuous Casting;
热型连铸凝固过程微观组织形成的数值模拟
4.
Thermochemical Model of Tar Formation during Biomass Gasification
生物质气化过程中焦油形成的热化学模型
5.
Simulation of the keyhole formation during deep penetration welding using an adaptive heat source model
用自适应热源模型模拟深熔焊小孔的形成过程
6.
FEM analysis of hot bending process for 17 type of coupler yokes
17型锻造钩尾框热弯曲成形过程数值模拟
7.
Molding steps: mold opening/ closing, heating injection and knocking out.
按成型步骤:可分为开锁模,加热,射出,顶出四个过程.
8.
Study on Numerical Simulation and Optimization of Process Parameters of Rapid Heating Cycle Molding Process
快速热循环注塑成型过程数值模拟与工艺参数优化研究
9.
Experimental research on pressure distribution and resin flow of T-stiffened skins in autoclave process
T形加筋板热压罐成型过程压力分布与树脂流动实验研究
10.
Research of Mathmatical Model on Thermal Process in Reheating Furnace;
步进底式加热炉热过程数学模型的建立与验证
11.
Heat Transfer Model for Batch Reactor and Optimization of Preheating Process;
间歇式反应釜热传递模型建立及预热过程优化
12.
Large Eddy Simulation of Hot and Cold Fluids Mixing in a T-Junction for Prediction of Thermal Fluctuations
T型管中冷热流体混合过程热波动大涡模拟
13.
The study of numeric simulation of heat transfer process of U-vertical buried pipe of GSHP
土壤源热泵U型垂直埋管传热过程的数值研究
14.
Mathematical Analysis of Temperature Field in Heat Transfer Process About Honeycomb-Type Regenerator
蜂窝型蓄热室热交换过程温度场的数学解析
15.
Building the Model of Strip Temperature in the Heating Process of Continuous Annealing Furnace;
连续退火炉加热段过程带温模型建立
16.
Computer Simulation of Microstructure During the Ohno Continue Casting Processes;
热型连铸过程微观组织的计算机模拟
17.
Prediction Model of Precipitation Fouling Process in the Heat Exchanger
换热器中析晶垢结垢过程的预测模型
18.
Study on Crack Forming during Hot-charging and Improving of the Medium and Heavy Plate;
中厚板热装热送过程裂纹形成及改善的研究