1.
Remove vibration damper bolt and washer from end of crankshaft.
从曲轴端拆下减震器螺栓和垫圈。
2.
Study of Crankshaft Free End Structure of YC6105ZLQ Diesel Engine;
YC6105ZLQ柴油机曲轴前端结构研究
3.
The main bearing journals fit into the cylinder block and the big end journals align with the connecting rods.
主要轴承曲颈安装在气缸体和与连杆大头末端匹配的曲颈上。
4.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
5.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
6.
"The cylinder of an internal-combustion engine is closed at one end by a plate called the head and open at the other end to permit free oscillation of the connecting rod, which joins the piston to the crankshaft."
内燃机的汽缸在一端用盖封住,叫做头,另一端敞开,使连接活塞和曲轴的连杆能自由摆动。
7.
At the rear end of the crankshaft is attached the flywheel, and at the front end are the driving wheels for the timing gears, fan, cooling water and alternator.
曲轴的后端连接着飞轮，前端是连接着定时齿轮，风扇，冷却水和交流发电机的驱动轮。
8.
The throw of the crankshaft, i.e. the distance between the main journal and the big end centers, controls the length of the stroke.
曲轴的摆幅，即在主要曲颈和连杆大头末端中心之间的距离，控制着冲程的行程。
9.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床
10.
Crankshaft main journal out of round or worn
曲轴主轴颈不圆或磨损
11.
crankshaft journal milling machine
曲轴轴颈铣削专用机床
12.
Replace crankshaft or grind journals
更换曲轴或磨光轴颈
13.
The feed holes for the crankshaft main bearings.
曲轴主轴承进入口。
14.
Crankshaft and main bearings service
曲轴和主轴承的维修
15.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
16.
A shaft that turns or is turned by a crank.
机轴用曲柄来转动的轴
17.
equilateral hyperbola
直角双曲线, 等轴双曲线
18.
The crank is an offset section of the crankshaft.
曲柄是曲轴的偏置部分。